User manual POLAROID FDM-1015

[. . . ] 10" Under-the-Cabinet LCD TV with DVD Player FDM-1015 User's Manual 20060302 Important Safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OF MOISTURE. CAUTION: Laser radiation when open. Do not stare into beam. POWER SUPPLY: Connect the supplied adapter to the side of the DVD player in the slot marked "Power In". [. . . ] · Press the , buttons on the remote control or front panel to select the radio stations forward and backward. When selecting the stations, the "CH 00" will appear on the display panel, where the "00" is the channel number of the stored radio station. After a few seconds, the "CH 00" disappears and the radio frequency will be displayed once again. - 19 - TV Function Basic Operation Connect the antenna to the antenna jack on the rear panel. If the player is in standby mode, press the POWER button on the front panel to turn on the power. Press the , buttons on the remote control to select the desired channel. To go to a channel directly, first press the number buttons on the remote control for input and then press the ENT button for confirmation. You may also wait for a moment without pressing the ENT button and the unit will go to the selected channel. Some preferences can be preset: Picture Parameter Setup Press the SETUP/SET button once on the remote control to enter PICTURE setup menu, and screen display as shown: PICTURE BRIGHTNESS CONTRAST COLOR LANGUAGE RESET EXIT 10 10 10 ENGLISH TV SETUP Use the , buttons to select the item you want to set (Brightness, Contrast, Color). Use the , buttons to adjust, you can adjust the items between 0 and 20. Use the , buttons to select the Language, press the , buttons to select English, French or Spanish. To restore a setting to the original value, use the , buttons to select Reset, then press the ENT button to confirm the change. To exit the setup menu, first use the , buttons to highlight PICTURE, then press the button on the remote control. Press the button on the remote control to enter TV Setup menu. TV System Setup When the button is pressed, the TV system setup menu will appear: - 20 - TV Function TV SETUP SIGNAL CHANNEL SKIP BLUE SCREEN FINE TUNING AUTO MEMORY PICTURE CATV 002 OFF ON EXIT Use the , buttons to select the item you want to set. First use the , buttons to highlight the TV SETUP, then press the button on the remote control to exit from the setup menu, and press the button on the remote control to return to the PICTURE setup menu. In CATV input mode, you can select channels from 2 to 125; in ANT input mode, you can select channels from 2 to 69. Skip When the button is pressed to turn the function ON, it will skip the current channel when using , to select channels. When the button is used to turn the function OFF, it will play the channels in sequence when selecting under normal playback status. Blue Screen This function is only available when there is no input signal. Use the button to turn the function ON, use the button to turn the function OFF. Fine Tuning Use the , buttons to select Fine Tuning, and then press the , buttons to tune forward or backward from the current channel Auto Memory Use the , buttons to select Auto Memory, press the ENT or button to enter auto memory mode: - 21 - TV Function SEARCHING EXIT CH001 089. 75MHz The auto memory will take a few minutes. The unit will search channels from the lowest channel to the highest channel in the standard channel list. When tuning operations are complete the unit will exit and store the channels by sequence in the memory. [. . . ] First use the , buttons to highlight the PICTURE, and then press the button on the remote control to exit from the setup menu. - 30 - Installing the unit in Kitchen Note: Before installing the unit in the kitchen, please make all the connections. Installing the unit under a cabinet The player unit may be installed in the kitchen with or without the spacers. See drawings below: NOTE: The dimensions of the player: 3. 1"H X 14. 6"W X 10. 2"D There should be at least 1. 4" distance between the unit and the wall. Mark the position of the 4 holes by using the supplied paper template. If the cabinet door overhangs the shelf and obstructs the unit, adjust the unit or the shelf height for clearance. [. . . ]