User manual POLAROID FLM-1511

[. . . ] Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Caution: To reduce the risk of electric shock, do not remove cover (or back). This symbol indicates important instructions accompanying the product. CAUTION RISK OF ELECTRIC SHOCK. DONOT OPEN This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. Caution: To prevent electric shock, plug 3-pronged plug into a grounded outlet. the Refer to the identification/rating label located on the back panel of your product for its proper operating voltage. FCC Regulations state that unauthorized changes or modifications to this equipment may void the user's authority to operate it. Caution: Using video games or any external accessory with fixed images for extended periods of time can cause them to be permanently imprinted on the LCD panel (or projection TV picture tubes). [. . . ] Remove the LCD TV from the box and place it on a flat surface in a well-ventilated location. Connect the output terminal of RF cable to the corresponding TV RF signal input terminal. The LCD TV is a high technology digital product, use quality RF cables to obtain optimal results. Connect the output terminal of the AV devices such as DVD player, VCR, etc. Connect one end of the D-sub terminal to the corresponding terminal of the host computer, and connect the other end to the corresponding LCD TV terminal. Caution: When connecting, plug directly and lightly to the interface, otherwise you may damage the pins in the connector. Ensure that every AV signal cord is correctly connected to the corresponding jack. Put the DC power plug in the DC input outlet of the TV, then plug the AC power plug of the power adapter in the AC power outlet. The panel can be tilted upwards up to 100 to achieve better viewing angle. When doing so, rotate the TV with two hands, one to hold the pedestal, the other to tilt the panel. Take care to do this with moderate pressure to prevent damage to the TV. GENERAL OPERATION To Turn the TV On After the power cord is plugged into the power socket, the TV will enter Standby mode. Whenever the main power is turned off and back on, the clock displays "12:00AM". Use Vol+/Vol- to switch between AM and PM and use numeric buttons to set the time. Use Vol+/Vol- to set times in the On Mode between Off, Once and Always. Always indicates mode will be turned off afterwards automatically. 14 3. This function is only available when the main power supply is connected. For the ClockTime and Off Time, "Minute" ranges from 00 to 59 and "Hour" ranges from 1 to12 AM and 1 to 12 PM. When "Hour" turns to "--" "Minute"also turns to "--" and the Clock function stops. Channel Select the On Program channel from 2 to 69 (Air mode) or from 1 to 125 (Cable mode) by pressing Vol+/Vol- repeatedly or numeric buttons directly. When TV is on, it turns directly to the preset channel at the preset TIME. When TV is in standby mode, at the preset time it first turns on and then goes to the preset channel. There will be no operation of the preset program during Auto Search and Always modes. [. . . ] In Mute mode, "MUTE" in red letters will appear on the upper-right corner of the screen. This sign is hidden when menu operation is entered, but MUTE still operates. When there is no valid signal input, the TV will be mute (but no mute sign will show). · There is an OSD menu to show the changes in broadcasting signals. [. . . ]