User manual POLAROID FLU-3242SA

[. . . ] 26"/32"/37"/42" High Definition LCD FLU-2642SA/FLU-3242SA/FLU-3742SA/FLU-4242SA 20061017 Safety Instructions IMPORTANT SAFETY INSTRUCTIONS ENGLISH WARNING To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to avoid the risk of electric shock, do not disassemble this equipment by anyone except a qualified service personnel. This symbol is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. CAUTION Use of controls, adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure. 1 Safety Instructions IMPORTANT SAFETY INSTRUCTIONS To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference. Do not place the equipment on any uneven or unstable carts, stands, tables, shelves etc. . The equipment may fall, causing serious injuries to children or adults and serious damage to the equipment itself. [. . . ] - To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p. - To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz. - When Source Devices have DVI Output Connector, you must connect audio with separated cable. How to connect 1. If Source Devices have HDMI Output Connector, Source Devices connect to DTV with HDMI Cable. (HDMI sends Digital Video and Audio with one cable, need not especial Audio Cable for using HDMI Cable. ) 2. If Source Devices have DVI Output Connector, Source Devices connect to DTV with HDMI to DVI Cable (not supplied with the product). In this case, you must connect audio with separated cable (Like Analog Audio cable). And then you can listen to normal Audio. In This Mode, the Supported TV SET Resolution Specification - 1920 x 1080 I @ 59. 94 Hz/60 Hz, 16:9 - 1920 x 1080 I @ 50 Hz 16:9 - 1280 x 720 P @ 59. 94 Hz/60 Hz, 16:9 (preferred format) - 1280 x 720 P @ 50 Hz 16:9 - 720 x 576 P @ 50 Hz 16:9 - 720 x 480 P @ 60 Hz 16:9 TM 22 USING THE FEATURES Using the Features Watching your LCD TV If the LCD TV does not display any picture, please check all the connections. ENGLISH 1 LOCK Press the POWER button to turn your LCD TV on. 2 Press the CH. / button to change channel number, or use the 0-9 & -/-- buttons to select a channel. The one/ two digit numbers can be set by pressing -/-- button. 3 4 Press the JUMP button to alternate back and forth between the current and previous channel. Press the VOL. Press again to turn the sound on. 5 Press the INFO button to display the information such as the channel and channel label. 23 USING THE FEATURES Wide-Screen Mode Wide-Screen mode allows you watch the broadcasts with various picture format in wide screen mode. Press the SCALE button repeatedly to toggle through the following wide mode settings. When watching 4:3 image, the original image will stretch horizontally to a 16:9 image to fill the screen. You can enjoy the picture format of 14:9 or general TV programme through the 14:9 mode. The original image will extend the 1. 25:1 image to fill the screen. This mode is for the viewing of DVDs with enhanced 16:9 image. If the original image of the DVD is 4:3, only the two ends of the image will extend to fill the screen, while the center image remains unaffected. 24 USING THE FEATURES Wide-Screen Mode When your TV receives the wide screen signal, following selection will lead you to adjust the picture horizontally or vertically, in a linear proportion, to fill the entire screen fully. ENGLISH When your TV receives the wide screen signal, it will be automatically changed to the original picture format inputted. When watching 4:3 image, the original image will be unchanged and there will be vertical bars on the side of the screen. Press the SCALE button to select repeatedly modes settings as follows: 16:9 14:9 ZOOM SPECTACLE FULL ORIGINAL 4:3 Note: You can only select 4:3 and 16:9 (Wide) in RGB[PC], HDMI[PC] mode only. You can only select 4:3, 16:9 (Wide) and Zoom in RGB[DTV], HDMI[DTV], Component [DTV] mode only. 25 USING THE FEATURES Using PIP/POP functions The PIP/POP feature allows simultaneously viewing of video from two sources. (It has image on the main and sub picture when the current source only for HDMI input. ) 1 Watching PIP - Press the PIP button to show the sub-picture. - Press the SWAP button to alternates between main and sub-picture. AV 6 ( H D M I ) C 10 15 AV 6 ( H D M I ) C 10 15 AV 6 ( H D M I ) C 10 15 MP:1280X720P P I P : PA L 5 0 I ---: --- MP:1280X720P P I P : PA L 5 0 I ---: --- MP:1280X720P P I P : PA L 5 0 I ---: --- PIP AV 6 ( H D M I ) C 10 15 DW1 12 AV 6 ( H D M I ) C 10 15 DW2 ---: --MP:1280X720P ---: --MP:1280X720P P I P : PA L 5 0 I 13 14 MP pop 3 2 Programme Selection for Sub-Picture - Press the PIP CH / button to select a programme for the sub-picture. 3 Selecting an Input Signal Source for the PIP - Press the PIP button to select the input source for the sub-picture. (Note:This function is not available in pop3 mode. ) 4 AV 6 ( H D M I ) C 10 15 MP:1280X720P P I P : PA L 5 0 I ---: --- Moving the PIP (PIP mode only) - Press the PIP Postion button. Repeatedly press the / or / button to activate the sub-picture position until it is suitable for you. 5 Picture Size - Press the PIP Size button and then use / button to adjust the subpicture size. (In DW1, DW2 modes, main picture and sub-picture is adjustable simultaneously. In PIP mode, sub-picture is adjustable. ) 26 USING THE FEATURES Using the Menu The MENU can be shown on the screen in the selected language. 1 Press the MENU button then the main menu will appear on the screen. ENGLISH 2 Use / to highlight your main menu option and then press to enter your selected option. Press the EXIT button to exit MENU. 3 Viewing the Menu Chart 1 2 3 4 5 SETUP VIDEO AUDIO TIME OPTIONS Allows you to set up some features: Auto programme, Manual search, Color system, Programme edit, Favourite prog, Area. Allows you to set up the following features: Clock, Turn off, Turn on. [. . . ] Press the EXIT button to return to normal TV viewing. 37 USING THE FEATURES Screen Setting Picture Format -You can enjoy the picture with various formats. Use / button in the Display Mode Menu or Press SCALE to select 16:9(Wide), 14:9, Zoom, Spectacle, Full, Original and 4:3. (Refer to Page23-24 "Wide-Screen Mode") Picture Size Zoom When enlarging or reducing the picture, the screen may display unnatural picture. Press the MENU button and then use / button to select the SCREEN menu. [. . . ]