User manual POLAROID IMAGE 1200

[. . . ] Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. 7. Copyright Protection This product incorporates copyright protection technology that is protected by U. S. [. . . ] · Do not use this remote control unit while simultaneously operating the remote control unit of any other equipment. -8- System Connections · · Do not connect the power cord until all other connections have been made. Ensure that you observe the color cord when connecting audio and video cables. Connecting to External AV Signal Source Use the audio and video cable to connect the AV input jacks on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and the external AV signal source and then press the INPUT button to shift to Composite mode. -9- System Connections Connecting to External AV Signal Source Use the audio cable to connect the audio input jacks on the rear panel of the unit to the external AV signal source. Use the S-VIDEO cable to connect the S-VIDEO input jack on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and the external AV signal source and then press the INPUT button to shift to S-VIDEO mode. - 10 - System Connections Connecting to External AV Signal Source (COMPONENT) Use the audio and video cables to connect the COMPONENT (Y/Pb/Pr) input Jacks on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and external AV signal source and then press the INPUT button to shift to Component mode. - 11 - System Connections Connecting to PC The unit can be connected to PC (person computer) via the VGA cable. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit. Connect one end of the audio cable to the PC audio input jack on the rear panel of the unit. Please set the PC's resolution at 1024x768@60Hz After connection, turn on the unit and the PC and then press the INPUT button to shift to VGA mode. - 12 - System Connections Connecting the Power Cable Plug the two-prong end of the power cord to an AC100-240V outlet. If you have difficulty inserting the plug, turn it over and reinsert it. If the unit will not the used for a long time, disconnect the plug from the outlet. - 13 - System Connections Connecting to TV Signal This unit can be connected to the TV signal input source via the TV jack on the rear panel. Press the MENU button to return to the previous menu. TV Rating Press the button to select TV Rating and press the OK button to enter. Press the button to select the desired item and then press the OK button to confirm your selection. Press the MENU button to return to the previous menu. Movie Rating Press the button to select Movie Rating and press the OK button to enter. Press the button to select the desired item and then press the OK button to confirm your selection. Press the MENU button to return to the previous menu. - 19 - TV Function CA Eng Rating Press the button to select CA Eng Rating and press the OK button to enter. Press the button to select the desired item and then press the OK button to confirm your selection. Press the MENU button to return to the previous menu. CA Fr Rating Press the button to select CA Fr Rating and press the OK button to enter. Press the button to select the desired item and then press the OK button to confirm your selection. Press the MENU button to return to the previous menu. Parental Lock Press the button to select Parental Lock and press the OK button to enter. Press the button to select the desired item and then press the OK button to confirm your selection. Press the MENU button to return to the previous menu. - 20 - TV Function Setup Setting Press the MENU button once to enter the setup menu. [. . . ] Then you can go on to set up the menu in a certain mode. Computer Screen Function The TFT LCD screen of the unit can be used as the computer screen. Take the steps of connecting the unit to the PC and then you can set up the menu. The operations of these menus in S-VIDEO, Composite, Component and VGA modes are the same with those in the TV mode. Note: Some of these menus are not available in these modes. - 24 - Troubleshooting SYMPTOM CHECK ITEM Make sure system connection is correct. [. . . ]