User manual POLAROID PDV-0700

[. . . ] 7" Portable DVD Player PDV-0700 Operation Manual 20040928 Contents Safety Precautions . . . . . . . . . . . . . . . . . . . . . 14 Using and Changing the Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 -2- Important Safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be sufficient to constitute a risk of electric shock to persons. [. . . ] Load disc with the label facing up to prevent damage to the player or disc. The player will automatically search for the disc and when it finds it, play will begin. Warning: Do not play poor quality discs to prevent damage to the lens. Start Playback 1. Press ENTER or PLAY. Pause Press the PAUSE button on remote to pause. Press the PLAY button to resume normal playback. Zoom Press the ZOOM button on remote to cycle through to different zoom settings. While in zoom mode use direction keys to pan around to different positions on the picture. - 16 - Basic Operation Stop During playback, press the STOP button on the remote control to stop playing. Press the PLAY button again and the player will play from the point where it stopped. Mode During playback, press the mode button on the control panel to change the aspect ratio on the screen. Title Menu 1. Press (direction button) or the number buttons to select the title or disc option you wish to play. NOTE: Title and Menu are only available for DVD discs. Previous and Next 1. Press the PREV button on the remote control, and playback will start from the previous track. Press the NEXT button on the remote control, and playback will start from the next track. - 17 - System Setup GENERAL SET-UP You can change the default settings to customize performance to your own preference. Remove the disc from the DVD drive and press the `SETUP' button on the remote control, the settings menu will appear. It includes General Setup, Speaker Setup, Dolby Digital Setup, Video Setup and Preference setup. When you enter a category all the items under this category will appear, and the items placed in the middle (or highlighted) will be the current set up. Press (right direction button on the remote control to select the correct category. Press (left direction button) to enter the other setup menu. General Setup The general setup is shown as follows: 1. Angle Mark If the scene was recorded from multiple angles, then you can easily change the camera angle of the scene you are watching. ON/OFF With this switched on you will be notified if alternative viewing angles are available. - 18 - System Setup 3. OSD Language There are five kinds of different OSD languages for selection. `SPDIF OFF' turns off the digital audio; `SPDIF/RAW' outputs the original. For example, if the disc being played is Dolby Digital, then the digital audio output is also Dolby Digital. Screen Saver When activated the screen saver automatically works if there has been no operation for a period of time. Speaker Setup 1. Down Mix Select "LT/RT" in DOWNMIX, then the player will output mixed audio in a way prescribed by Dolby. [. . . ] If you don't plan on using the battery for an extended period of time, discharge the battery and keep it in a dry and cool place. If the battery loses power during play, stop playing the DVD, otherwise damage may occur. A fully charged battery is able to play a DVD with the TFT on for about 3 hours. Working conditions and precautions: · · · · New batteries should be fully charged before initial use. [. . . ]