User manual POLAROID T-79 FILM DATA SHEET

[. . . ] Film Data Sheet T-79 4 x 5 Sheet Film Description Professional Color Sheet Film 4 x 5 inch 10. 2 x 12. 7 cm Type film Medium-speed, medium-contrast, medium-grain, daylight and electronic flash balanced (5500°K) color print film. [. . . ] If you get some paste on your skin, wipe it off immediately, then wash with water to avoid an alkali burn. If eye contact occurs, quickly wash the area with plenty of water and see a doctor. Keep discarded materials away from children, animals, clothing and furniture. Alternative Product Use Polacolor T-59 for emulsion lift and T-64 Tungsten for tungsten lighting. Processing Information Temperature °F °C 70-95 65-69 61-64 55-60 21-35 18-20 16-17 13-15 Proc. Time (sec. ) Equivalent Film Speed (ISO/DIN) Exposure Adjustment None None None None Limited Warranty See information on the film box. 90 120 150 180 100/21 100/21 100/21 100/21 "Polaroid" and "Polacolor" are trademarks of Polaroid Corporation, Waltham, MA 02451 USA. All other product names may be the property of their respective owners. Film Data Sheet Technical Data Polacolor Pro 100, T-79 Instant Color Film This information represents the typical performance of Polaroid Pro 100 color films. Specific film lots may vary. Characteristic H&D curve for normal development Recommended speed (ISO) Recommended processing time and temperature Resolution (1000:1) Contrast 100 / 21o 3 Blue H&D Curves @ 71oF/21oC 90 sec. at 70oF/21oC 8 line pairs/mm medium Green Red 2 Sample Density 1 0 -3 -2 -1 Relative Log Exposure 0 Characteristic H&D curve for hot development H&D Curves @ 95o F/35o C 3 Blue Green Red Blue Green Red Processing time and temperature o o F C Time in seconds 90 90 90 120 150 180 95 75 70 65 60 55 32 24 21 18 15 13 Characteristic H&D curve for cold development H&D Curves @ 55oF/18 oC 3 D-Max: The density value for the film's darkest black. In prints, the whiteness of the brightest highlight, relative to the unprocessed print. [. . . ] Spectral Sensitivity: Shows the equivalent energy needed at each wavelength in order to activate the emulsion so that it produces a neutral density of . 75. Spectral Sensitivity 100 10 1 0 350 400 450 500 550 600 650 700 Wavelength (nm) [. . . ]