User manual POLAROID TDM-1311

[. . . ] Important Safyguards Important Safety Precautions This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts. AU C AU T I O N RISK OF ELECTRIC SHOCK DO NOT OPEN Caution: To reduce the risk of electric shock, do not remove cover (or back). This symbol indicates This symbol indicates "dangerous voltimportant instructions age" inside the product that presents a accompanying the risk of electric shock or personal injury. WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. [. . . ] Under AV1 connection, connect the external equipment to the back panel of the unit as shown in the figure below: 2. Under AV3 mode, connect the external equipment to the side panel of the unit as shown in the figure below: 8 General Description DVD Player Basics If you turn on the DVD player for the first time, press the GUIDE button to set up the DVD menu system when the unit is in the stop mode. Regional coding Both the DVD player and the discs are coded by region. These regional codes must be matched accordingly for the loaded disc or it may fail to play back. Loading and Playing Discs DVD disc, audio CD disc and recorded CD-R/CD-RW discs are playable for this DVD player. Before the playback, make sure the discs are compatible with this DVD player. Press the DVD button on the remote control or INPUT button on the main unit(or on the remote control) to turn on the DVD player. Press the OPEN/CLOSE button on the main unit (or on the remote control) to open the disc tray. Place a disc gently into the tray with the disc's label facing up. Press the OPEN/CLOSE button on the main unit (or on the remote control) to close the disc tray. Press the PLAY button on the main unit (or on the remote control) to start the disc playback and display the disc menu. When the disc menu appears, select your desired option and press the OK button on the remote control to start playback. The DVD player reads the disc's table of contents, and then one of two things happens depending on how the disc was programmed: . Highlight that option and press OK on the remote control. 9 Using the Menu System TV Function Menu Menu basic operation 1. Press the MENU button on the main unit (or on the remote control) to enter menu mode. Press the VOL / button on the main unit ( or / button on the remote control) to select the icon. Press CH / button on the main unit (or / button on the remote control to select your desired mode. Press the VOL / button on the main unit (or / button on the remote control) to change the setting. CC ON MUTE To display close caption automatically when the MUTE button is pressed with the unit turned on. Note: The BACK GROUND function is not available when the unit is in RF input mode. 11 Using the Menu System Using the TUNING menu The TUNING menu is used to tune the channel. To select AIR source to receive radio broadcast frequency. CHANNEL Use the VOL / button on the remote (or the VOL / button on the front of the TV) to scroll through the channels available. CHANNEL NAME To press the VOL / button on the main unit (or the / button on the remote control) to select the TV channel. Allows you to name a channel. [. . . ] Press the / and the / button to highlight the desired section or item. Tip and Note: Many discs skip the disc menu and start playing automatically. Press the MENU button on the remote control during the disc playback to access the disc menu. Any settings you change on the disc menu only override the settings in the DVD player's menu temporarily. [. . . ]