User manual POLAROID TLU-02041B

[. . . ] HD-Ready Widescreen LCD TV with Digital Tuner Your TV may look different from the one pictured above. Questions?Need some help? This manual should help you understand your new product. If you have questions, call our free-phone number found on the insert with this icon: Or visit www. polaroid. com. ©2007 by . All rights reserved. "Polaroid" and "Polaroid and Pixel" are trademarks of Polaroid Corporation. [. . . ] For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connection that is provided with the various antenna systems. A 75-ohm system is generally a round cable (not included) with IECtype connector that can easily be attached to a terminal without tools. IEC-type connector 75-ohm coaxial cable (round) A 300-ohm system is a flat twin-lead cable (not included) that can be attached to a 75-ohm terminal through a 300-75-ohm adapter (not included). 300-ohm twin-lead cable (flat) 13 Chapter 2 Installing the LCD TV Use one of the following two diagrams when connecting an outdoor antenna. Combination VHF/UHF antenna VHF/UHF Antenna 300/75-ohm adapter (not included) VHF/UHF Antenna 300-ohm twinlead cable 75-ohm coaxial cable B. Separate VHF and/or UHF antennas UHF Antenna Combiner 300-ohm twin(not included) lead cable OUT IN 75-ohm coaxial cable 300-ohm twinlead cable VHF Antenna 14 Chapter 2 Installing the LCD TV Cable TV (CATV) Connection A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75-ohm coaxial cable to the set, connect the 75ohm cable into the ANT. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company. ENGLISH This converter/descrambler is necessary for normal viewing of scrambled channels. (Set your TV to channel 3 or 4, typically one of these channels is used. If this is unknown, consult your cable TV company. ) For more specific instructions on installing cable TV, consult your cable TV company. One possible method of connecting the converter/descrambler provided by your cable TV company is shown in the diagram below. RF switch (not included) OUT A IN B 2 set signal splitter (not included) Cable TV Line VHF/UHF IN Cable TV converter/ descrambler (not included) The RF switch (not included) is required to provide two inputs (A and B). Setting the RF switch to position A allows viewing of all unscrambled channels by using the TV channel keys. Setting the RF switch to position B allows viewing of all scrambled channels via the converter/descrambler by using the converter channel keys. 15 Chapter 2 Installing the LCD TV Use an antenna cable to connect the ATV/DTV signal to the LCD TV's ANT. terminal. VHF/UHF IN Connect the AC power cord at the back of the TV and connect the power cord to wall outlet. Turn the POWER SWITCH of rear TV on. Press the button on the remote control to turn on the LCD TV. Always disconnect the LCD TV from the power outlet when the LCD TV will not be used for a long period of time. The POWER button on the front panel is only used for switching the LCD TV into standby, it does not disconnect the device from the main voltage. To completely disconnect the main voltage, please remove the power plug from the socket. The 1st time installation screen will automatically tune both ATV and DTV signals on initial turn on. Make sure an aerial is fitted, then press the symbol OK button on the remote to start the Auto Programme Scan (APS). First ATV will auto tune and auto sort then DTV will automatically follow. Region Confirm C Language Country APS English UK Is the aerial plugged in!Press OK to start APS. Move Select Exit 16 Chapter 2 Installing the LCD TV 2. The Auto Programme Scan (APS) automatically creates a list of receivable channels. Press the EXIT button at any time to interrupt the auto tuning process. 0MHz CH 0 Exit ATV MODE Full scan channels installation TV Services: SZTVM03 SZTVM02 SZTVM01 3 readio services: DTV MODE Ch 52:722MHz-OFFSET:None-BAND:8MHz Scanning in prpgress Signal quality The first time installation is now completed. 1 RE-Tuning after initial setup. ATV Mode: Press the INPUT button on the remote to display the Source List. Use the buttons to select TV, and press the OK button. TV AV S-VIDEO SCART YPbPr DTV HDMI VGA 1. [. . . ] Press the OK button to automatically adjust the display settings to optimize performance based on the VGA mode. Controls the width of the picture based on the VGA mode. 37 Chapter 4 Using the DTV Features Chapter 4 USING THE DTV FEATURES Operating the Menu You can set the digital TV setting, press the INPUT button on the remote to display the Source List. Press the MENU button on the remote control, the on-screen menu will appear on the screen. Use the buttons to select DTV Services: C DTV Services Channel List Configuration Parental EPG Move Select Exit Use the buttons to highlight an individual DTV Services option, use or OK to display the sub-menu. Channel List Menu: Channel list Create a favourite list Modify a favourite list Delete a favourite list 38 Chapter 4 Using the DTV Features Channel List Menu: Configuration ENGLISH Channel Installation User Settings System Parameters Signal Information Parental Control Menu: Parental Control Parental Control Receiver lock Configuration Menu Channel lock Maturity level Enabled No No No None PIN code change EPG Menu: GUIDE 17:56 23/03/2004 2 BBC TWO THURSDAY 23/03 17:15 The weakest Link 18:00 Paralympic Grandstan The Weakest Link 17:15 - 18:00 Nine contestants must play as a team to build up the prize fund and then act ruthlessly to remain in the game as, round by round, the weakest link is OTHER DAYS DETAILS The DTV features may not be available in some countries. 39 Chapter 4 Using the DTV Features Customizing the Channel List Settings The Channel List feature allows you to select programs from a list you specify. Channel list Create a favourite list Modify a favourite list Delete a favourite list The Channel List menu includes the following options: Create a favorite list Press the buttons to highlight the Create a Favorite list and press OK to display the menu: Create a favorite list 1 2 3 4 5 6 BBC ONE BBC TWO BBC THREE CBBC Channel BBC NEWS24 BBCi Lock Skip Skip/Add All Press the buttons to highlight the channel you want to select, and press the green button repeatedly to select skip or add ( ) the selected channel. 40 Chapter 4 Using the DTV Features Modify a favorite list Press the buttons to highlight the Modify a Favorite list and press OK to display the menu: ENGLISH Modify a favorite list 1 2 3 4 5 6 BBC ONE BBC TWO BBC THREE CBBC Channel BBC NEWS24 BBCi Lock Exit Screen Use the buttons to highlight the channel you want to modify and press the Red button repeatedly to select LOCK( ) or UNLOCK. [. . . ]