User manual POLAROID TLU-02643B EN

[. . . ] 1 Features of your new television. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 Your new television has . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Select the system in which you would like to make the search from the System tab. MENU BACK 10 I k Move into SETUP by pressing the down movement button. Press OK on your remote control and select "S" for cable channels and "C" for channels received via the antenna. Move onto the PROGRAM NO tab and enter the channel number in which you would like to have the channel stored. If the broadcast viewed on SETUP SYSTEM CHANNEL FINE TUNE SEARCH PROGRAM NO STORE AUTOPROGRAM BG S06 0 P13 in descending order with Left movement button. Then store it in the memory pressing the right or left movement buttons. Repeat the same procedure for other channels by selecting the program number of your SETUP SYSTEM CHANNEL FINE TUNE SEARCH PROGRAM NO STORE AUTOPROGRAM BG S06 0 P13 SELECT MENU BACK SELECT MENU BACK the screen is of your desired quality, first move onto the STORE tab with the down movement button to store in the memory the selection you have made and store the channel by pressing the right or left movement buttons. The channel will be stored according to the program number of your choice. In the event that you wish to exit the channel settings menu for any reason, simply press the EXIT button. choice from the PROGRAM NO tab. If the channel you found is not of the desired quality and requires Fine Tuning or if you would like to rename the channel, refer to the relevant sections. 6. 4-Fine Tuning If the channel you found is not of the desired quality and requires Fine Tuning, then select the FINE TUNE tab by pressing the downward movement button intheSetupmenu. Usingthe right-left movement buttons on your remote control, adjust the broadcast displayed on the screen toyourdesiredquality. Undernormal circumstances, you will not require to use the Fine Tune function. The AFC values of your television will automatically adjust and lock themselves to the channel. However, you might need it in case the television transmitters do not operate according to the standards. If the program is not named, then the channel number of that program will be displayed automatically. 6. 5. 2-Deleting a stored channel: Select the program you would like to delete by pressing the up/down or right/left movement buttons. "You may perform the deletion process by pressing the "BLUE" button or you may abort the deletion process by pressing the MENU button. "Once you pres the "BLUE" button, the selected program is deleted and the 12 I k 7 The settings on your new television: 7. 1-Setting-up the Volume Menu You may perform volume settings by using the " VOL+" or "VOL-" buttons on your television or the "VOL+"/"VOL-" buttons on your remote control. Select VOLUME by pressing the up/down movement buttons from the main menu and press the OK button. In this menu, you can select one of the titles for which you would like to perform an operation. SOUND VOLUME BALANCE SOUND TYPE SOUND MODE AVL EQUALIZER HEADPHONE 7. 1. 4-AVL (Automatic Volume Limiting) Television transmitters have different sound levels. This can be noticed from the different volume levels that can be heard while switching from one program toanother. Usingtheright/left movement buttons, select ON. TheAVL(Automatic VolumeLimiting)functionmaintainsthe same sound level as you switch from program to program. Select OFF to cancel it. 7. 1. 5-Headphone By connecting headphones to your television you can listen to the program sounds independently from your television. To turn up and down the headphone volume level, select HEADPHONE tab from the Volume menu and adjust the volume level by using the right-left movement buttons. When you want to hear the sound from the headphone only, just press the MUTE button on your remote control. MONO NORMAL OFF CHANGE MENU BACK 7. 1. 1-Balance To adjust the sound balance between the right and left loudspeakers to the desired level, select the balance tab in the volume menu by using the down movement button. Usingtheright/left movement buttons adjust this option to the desired level. 7. 1. 6-Equalizer Select the EQUALIZER tab in the Volume menu and confirm with the OK button. TheEqualizermenuisdisplayed. Using the right/left, up/down movement buttons, you may select either one of the preset Music, Sports, Cinema and Speech options which enhance the sound effect depending on the feature of the program you are watching or the USER option which you can adjust as you desire. You can adjust the frequency levels with the up/down movement buttons. [. . . ] The Source menu will appear on the screen where you can select the access mode. Here, you can select the desired input. The headphones must have an impedance between 8 and 32 ohms and have a 3. 5 mm stereo jack plug. Plug the headphone jack into the headphone socket of the TV. TV: While in the AV modes, move onto this option and press OK button for switching to the TV mode. SCART 1: To watch the picture of the High Definition - HD ready broadcast device connected to Scart1, move onto this option and press the OK button. (YoucanwatchviathisScartifthe connecteddevicehasaRGBoutput). SCART2 (Optional): To watch the picture of the broadcast device connected to Scart2, move onto this option and press the OK button. SVIDEO: To watch the picture of the Your television can receive high-definitionsignals(HDTV). You can connect the input sources(HDTVset-topboxor HDTVDVDplayer)tothe(HDMI)socket (digitalHDTVsignal). Thisensuresthat you can view digital HDTV programs, even iftheyarecopy-protected(HDCPHighDefinitionCopyProtection). broadcast device connected using the S-Video input, move onto this option and press the OK button. AV (Optional): To watch the picture of the broadcast device connected using the RCA(Cinch)input, moveontothisoption and press the OK button. [. . . ]