User manual POLAROID TLU-41511

[. . . ] Need some help? This manual should help you understand your new product. If you still have questions, call our help line found on the insert with this icon: Or visit www. polaroid. com/support. TABLE OF CONTENTS 1 2 3 4 5 Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features of your new television. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Move to the SETUP menu by pressing the PP movement button in Main Menu and confirm your selection with OK button. Select the system in which you would like to make the search from the SYSTEM P tab by pressing the ­VOL, VOL+ buttons. Press OK on your remote control and select "S" for cable channels and "C" for channels P received via the antenna. Move onto the PROGRAM NO tab and enter the channel number in which you would like to have the channel stored. If the broadcast viewed on the screen is of your desired quality, first move onto the STORE tab with the P- movement button to store in the memory the selection you have made and store the channel by pressing the VOL or VOL+ movement buttons. The channel will be stored according to the program number of your choice. In the event that you wish to exit the channel settings menu for any reason, simply press the MENU button. SETUP SYSTEM CHANNEL FINE TUNE SEARCH PROGRAM NO STORE AUTOPROGRAM BG S06 0 P13 SELECT BACK COUNTRY SELECTION BELGIUM CZECH REP DANMARK DEUTSCHLAND ELLADA ESPANA FRANCE HUNGARY IRELANDA ITALIA NETHERLANDS NORGE ÖSTERREICH POLSKA SCHWEIZ SUOMI SVERIGE TÜRKYE U. K. . . . . . . . . . . . . . . . . . . . . . . . . . . START AUTOPROGRAMMING BACK At the same moment, the Autoprogram menu will be displayed and a marker indicating the progress of the autoprogramming will appear as shown below. To stop the process at any given time, SEARCHING % 20 STOP SELECT BACK please press the MENU button. The Program Table, which will allow you to sort the channels as you wish, will be displayed after the auto-search is complete. Note: During autoprogramming it's not possible to turn to standby mode. First of all you have to exit autoprogramming. 6. 3. 2-If you do not know the channel number Press the MENU button. Move to the SETUP menu by pressing the P- movement button in Main Menu and confirm your selection with P - 9I k OK button. Select the system in which you would like to make the search from the System tab. Press OK on your remote control and select - VOL "S" for cable channels and "C" for VOL + channels received via the antenna. Select SEARCH tab using the P+/P- movement buttons, and scan the channels in ascending order with VOL+ movement button and in descending order with -VOL movement button. Then store it in the memory pressing the VOL+ or -VOL movement buttons. Repeat the same procedure for other channels by selecting the program number of your choice from the PROGRAM NO tab. If the channel you found is not of the desired quality and requires Fine Tuning or if you would like to rename the channel, refer to the relevant sections. or -VOL movement button. 6. 5-Program Table PROGRAM TABLE 00 Channel 01 Channel 02 03 04 SKIP MOVE SELECT 05 06 07 08 09 10 11 12 13 14 Press the MENU button. Move to the PROGRAM TABLE tab by pressing the NAME DELETE BACK P- movement button in Main Menu and confirm your selection with the OK button. You can also enter the program table directly by pressing the PT button on your remote control. 6. 5. 1-Switching the locations of the stored channels: + P 6. 4-Fine Tuning P If the channel you found is not of the desired quality, then select the FINE TUNE tab by pressing the - VOL P- movement button in the Setup menu. Usingthe­VOL/VOL+ VOL + movement buttons on your remote control, adjust the broadcast displayed on the screen to your desired quality. Undernormalcircumstances, you will not require to use the Fine Tune function. The AFC values of your television will automatically adjust and lock themselves to the channel. [. . . ] These inputs are: 1-Antenna input 2-VGA input (optional) 3-SCART input 1 4-RCA input You can connect your external device supporting the suitable inputs to your TV via these inputs. By pressing the AV button on your remote control, select the external source input to which you connected your device. 9. 2. 1-PC Connection: Connect the D-Sub15 connector to the PC-INinputontherearofyourtelevision using a suitable cable (not supplied with the television). Again using a suitable cable, you can also listen to the sound from your PC by connecting the sound output of your PC to thePCAUDIO-INinputontherearofyour television. 9. 2. 2-Transition to the PC Mode For your LCD-TV to switch to the monitor (PC) mode, press the AV button on your remote control. Select PC by pressing the P+/ P- movement buttons and press the OK button. [. . . ]