User manual POLAROID TLU-43743B

[. . . ] 26"/32"/37" 16:9 HD-READY DIGITAL LCD Your TV may look different from the one pictured above. Questions?Need some help? This manual should help you understand your new product. If you still have questions, call our help line found on the insert with this icon: Or visit www. polaroid. com/support. TABLE OF CONTENTS Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 1-Cleaning the screen and cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 2-Disposing of your TV at the end of service life. . . 1 1. 3-Superior features of your integrated digital television . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The channels will be automatically searched and those found will be stored in memory starting from the program selected in the SETUP menu. At the same moment, the Autoprogram menu will be displayed and a marker indicating the progress of the autoprogramming will appear as shown below. AUTOPROGRAM SEARCHING % 20 MENU STOP To stop the process at any given time, please press the MENU button. The Program Table, which will allow you to sort the channels as you wish, will be displayed after the automatic search is complete. MENU BACK 14 I GB 6. 4. 2-Manual tuning of channels and storing in the memory 6. 4. 2. 1-Ifyoualreadyknowthe channel number SETUP SYSTEM CHANNEL FINE TUNE SEARCH PROGRAM NO STORE AUTOPROGRAM CHANGE BG S06 0 P13 6. 4. 2. 2-Ifyoudonotknowthe channel number Press the MENU button. Move to the SETUP menu by pressing the down movement button in Main Menu and confirm your selection with OK button. Select the system in which you would like to make the search from the System tab. Press OK on your remote control to select "S" for cable channels and "C" for channels received via the antenna. Select SEARCH tab using the up/down movement buttons, and scan the channels in ascending order with Right movement button and in descending order with Left movement button. Then store it in the memory by pressing the Right or Left movement buttons. Repeat the same procedure for other channels by selecting the program number of your choice from the PROGRAM NO tab. If the channel you found is not of the desired quality and requires Fine Tuning or if you would like to rename the channel, refer to the relevant sections. 6. 4. 3-Fine Tuning If the channel you found is not of the desired quality and requires Fine Tuning, then select the FINE TUNE tab by pressing the Down movement button intheSetupmenu. Usingthe Left/Right movement buttons on your remote control, adjust the broadcast displayed on the screen toyourdesiredquality. Undernormal circumstances, you will not require to use the Fine Tune function. The AFC values of your television will automatically adjust and lock themselves to the channel. However, you might need it in case the television transmitters do not operate according to the standards. To store in the memory, the settings you have made, select the Store tab and press the Right or Left movement button. MENU BACK Press the MENU button. Move to the SETUP menu by pressing the down movement button in Main Menu and confirm your selection with OK button. Select the system in which you would like to make the search from the System tab. Press OK on your remote control to select "S" for cable channels and "C" for channels received via the antenna. Move onto the PROGRAM NO tab and using the number buttons enter the channel number in which you would like to have the channel stored. If the broadcast viewed on the screen is of your desired quality, first move onto the STORE tab with the down movement button to store in the memory the selection you have made and store the channel by pressing the Left or Right movement buttons. The channel will be stored according to the program number of your choice. In the event that you wish to exit the channel settings menu for any reason, simply press the EXIT button. 15 I GB 6. 4. 4-Program Table Press the MENU button. Move to the PROGRAM TABLE tab by pressing the Down movement button in Main Menu and confirm your selection with the OK button. [. . . ] In order to make the necessary settings in this menu, you can use the right-left, up-down movement buttons on your remote control. 9. 2. 4-HORIZONTAL POSITION: Horizontalpositionsetting 9. 2. 5-VERTICAL POSITION: Vertical position setting 9. 2. 9-PICTURE FORMAT You can select the PC image to be displayed in 16:9, 14:9 or 4:3 formats. Note 1: 4:3, 16:9 and 14:9 picture formats are supported in 16:9 panels. Note 2: In the Monitor mode, you can make the Brightness, Contrast, Sharpness, Red, Green and Blue Settings from the PICTURE menu. Switching to the HDMI mode Connect to the HDMI input at the back of your TV by using the connector located on your PC or your digital video-transmission device with a suitable cable (not supplied with the TV). [. . . ]