User manual POLAROID TTX-141

[. . . ] Adhere to all warnings on the television and in the operating instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. [. . . ] When ANTENNA is set to AIR, access the channel by pressing two digits on the remote control. When ANTENNA is set as CABLE, use three digits on the remote control to select the channel. To select channels above 100, press and hold the "1" number for two seconds. Turning the volume up or down Adjust the sound by using the VOL / button on the television or on the remote control. 6 External connection This unit can be simultaneously connected to a VCR, DVD player, video camera and other audio-video equipment . For monophonic audio devices, connect the audio using the AUDIO L jack. Under AV1, AV2 mode, connect the external equipment to the back panel of this television as shown in the following figure: YELLOW(VIDEO) WHITE(AUDIO) RED(AUDIO) 2. Under AV3 mode, connect the external equipment to the side panel of this unit as the following figure shows: Video input Audio input (L MONO) Audio input (R) 7 General description Menu operation instruction Menu basic operation 1. To enter a menu, press the menu button on the television or on the remote control, then use the VOL / button on front of the television (or the / button on the remote control) to select the icon. Press CHAN / button on the television or on the remote control to select the mode you want to change. Use the VOL / button on the television or on the remote control to change the setting. Press the MENU button on the television or on the remote control to return the previous menu. You can press the CLEAR button on the remote control to exit the menu operaton directly. Using the PICTURE menu The PICTURE menu allows you to make an adjustment to your picture settings. It also allows you to customize the picture mode based on the type of program you are viewing. KKY261 N CHAN CHAN CONTRAST BRIGHTNESS COLOR SHARPNESS TINT COLOR TEMP Adjust the difference between the light and dark areas of the picture. Adjust left or right to decrease or increase color intensity or saturation. Provide three automatic color adjustments: Cold for a more blue palette of picture color; Normal; Warm for a more red palette of picture color. Using the SOUND menu The SOUND menu allows you to make adjustments to your sound settings. SOUND BASS TREBLE BALANCE SURROUND 50 50 0 OFF BASS TREBLE BALANCE SURROUND 8 Adjust left or right to decrease or increase low pitched sound. Turn on or off the surround sound effect. General description Using the TIMER menu The TIMER menu allows you to set the sleep timer. TIMER SLEEP TIMER 0 SLEEP TIMER: Lets you set the time you want the television to turn itself off after a given time, press the VOL / button to setup the timer. Using the FUNCTION menu The FUNCTION menu provides several options for setting up your television. FUNCTION LANGUAGE BACKGROUND BLACK STRETCH NOISE REDUCE CLOSE CAPTION ENGLISH ON ON OFF CC1 LANGUAGE Select from the available languages to display the menus. (You can select from English, French, or Spanish. ) BACKGROUND Turn on or off the background function when no signal is received. BLACK STRETCH NOISE REDUCE CLOSE CAPTION Turn on or off black stretch function. Select from eight closed captioned modes, including four text modes. Using the TUNING menu The Tuning menu offers operations for tuning and channel edit. TUNING SOURCE CHANNEL CHANNEL NAME DELETE CH FINE TUNE AUTO SEARCH AIR 8 <> YES SOURCE CHANNEL Select from AIR or CABLE. Select CABLE to receive your broadcast from a cable television provider. Use the VOL / button on the television or on the remote control to scroll up and down through the channels available using your outdoor antenna or rabbit ears. [. . . ] Check there are no obstacles before the sensor window of remote control unit. Check if the color, bright, and contrast controls are correctly adjusted. Check if the channels are correctly tuned (see "Fine tuning") . The receiver may be affected by interference from a nearby radio broadcasting transmitter or by another television receiver. [. . . ]