User manual POLAROID XSS7

[. . . ] The built-in Lithium-ion battery will charge to its full working capacity regardless of it state of depletion. On the camera’s top left control panel locate the Power Button and press it once. After 4 seconds, the startup screen will disappear, and the camera will display live video. [. . . ] The Browsing Arrows shown in Figure C will advance one file forward or backward. When a video frame is displayed that you want to review, press the Play Button, and the clip will play. While a clip is playing, you may pause the clip, play at normal speed, play faster or slower than normal speed (See Figures A and B below). The screen shots shown in the last two sections on playing back files feature icons of a garbage can in their lower-left corners. If you wish to delete either a still image file or a video clip, press the garbage can icon. After pressing the icon (item in the figures below), the screen on the right will appear asking if you want to delete the file shown on the display. Press “Yes” to delete the file; press “No” to keep it. After pressing your selection, the playback screen shown on the left will return along with the playback icons: type of file, file number/file counter, folder name, forward/ reverse advance arrows, garbage can, play, and still/video camera mode. Connect a compatible USB cable from the camera’s USB Receptacle to your personal computer. The camera is a plug and play device which will be recognized immediately by your computer. Your computer will treat the camera as a removable disk and will appear as such under “My Computer. Photos and videos you’ve taken are stored in I:\DCIM\100MEDIA (“I” is the drive letter assigned to the camera by your computer). (“I” is the drive letter assigned to the camera by your computer). Files can be accessed by photo and video editing programs directly from the camera as a removable disk. It recommended that you save all the files from the camera to a folder on your C: drive. 6 7 Figure C 8 8 9 POLAROID XS7 USER GUIDE POLAROID XS7 USER GUIDE 3. There are just two buttons required for recording video and images: the Shutter Release, and the Power Button. Remember to put the Mode Switch in your desired recording position before inserting the camera in the waterproof case. [. . . ] Turn the Waterproof case (or mounting adapter) onto the ¼-20 screw of the Helmet Mount until secured 5. Turn the Locking Wheel so it applies pressure to the case to keep the connection secure. Loosen the Tilt Knob, to adjust for the proper aiming angle; then tighten the knob. [. . . ]