User manual POWERFIX KH 4056 BICYCLE HOIST

[. . . ] Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. Check for the correct tightness of all screws before using the bicycle hoist. [. . . ] If it is not possible to secure the retaining hook on the saddle the bicycle may not be lifted with the bicycle hoist!Measure the distance between the handlebars and the seat on your bicycle. The bicycle hoist is intended to save space and relieve the tyres during bicycle storage. Transfer this measurement to the ceiling, marking the required drill-holes with the aid of a ceiling bracket. Make a stable square knot at one end of the nylon cord and thread it through the rear ceiling bracket (See Fig. Fasten both ceiling brackets to the ceiling with the supplied cross-head screws and plugs (see Fig. Connect the construction with the cord in accordance with the block and tackle principle. Run the cord through the rollers in alternation, starting at the ceiling bracket (see Fig. Check that all screws are firmly tightened before using the bicycle hoist. To do this, lift the bicycle with the hoist and mark the position for the wall mount. [. . . ] Se till att det finns ett tiklräckligt stort avstånd till sidoväggarna. Lämna in apparaten till ett företag som har tillstånd att ta hand om den här typen av uttjänta apparater eller till rätt miljöstation på den kommunala avfallsanläggningen för kassering. [. . . ]