User manual POWERFIX KH 2927-2 MULTI-FUNCTION DETECTOR

[. . . ] Do not use the appliance at locations where there is a risk of fire or explosion, e. This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a Person responsible for their safety or receive from this person instruction in how the appliance is to be used. [. . . ] Locating power supply lines - AC Before boring a hole in the wall, also check to ensure that there is not a cable carrying alternate current located under the sur face. Therefore, after detecting metals, ALWAYS carry out an additional search for power cables!To enable a power cable to be detected by the appliance, its circuit must be under power. If you wish to trace for example the cable route from light switch to lamp, switch the lamp on. Repeatedly press the function switch 3 until an arrow appears above one of the following detection objects in the display 2: STUD (Locating bearers) METAL (Locating metallic objects) DEEP (Locating cavities) AC (Locating power supply lines) 3. Hold the detector with the underside flat against the area to be examined and press the button PUSH 6 down (several short signal tones sound). Should an appropriate object be located close to the measuring head 1, at first a few and then more be ams will appear in the display 2. â· The closer the measuring head 1 is located to the object, the greater the number of beams shown in the display 2. When a constant signal tone can be heard this indicates that the object is located directly under the measuring head 1 of the detector. Now, move the detector further over the area, until the number of beams in the display reduces and the signal tone switches itself off, to pinpoint the exact position and placing of the object. A battery symbol appears in the display 2 when the battery is weak resp. â· If you do not intend to use the appliance for an extended period, remove the battery from the battery compart ment. [. . . ] The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. The warranty period will not be extended by repairs made unter warranty. [. . . ]