User manual PRIMERA DP-4101

[. . . ] 110124-511276 USER'S MANUAL For Macintosh and PC *after registering your product. See www. primerawarranty. com for terms and conditions. © 2011 All rights reserved For the most recent version of this manual please visit http://primera. eu/europe/manuals. html Notices: The information in this document is subject to change without notice. NO WARRANTY OF ANY KIND IS MADE WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No liability is assumed for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. [. . . ] If you would like these settings to be the default for all projects of this type click Save as Defaults. The fastest recording speed is determined by the lowest maximum speed of the blank media or the drive. For example: The "fastest" speed in a 20x max drive with 16x max media would burn at 16x. In many cases a slower speed should be selected to achieve the least number of rejected discs. 20 Creating Discs · Recording Type. For track at once, the laser is turned off after each track, which produces a two-second gap. The track-at-once feature, enables songs and data to be written at different intervals. The lead-in sectors that are written at the beginning of each session contain the location where additional data can be placed on the disc. If this option is checked, the lead-in, all the tracks and lead-out are written in same action. If the disc is left open additional data can be added in another session. The file system is the method by which the files and folder are arranged on the burned disc. The recording engine can also add a bridge which effectively adds another file system to the disc. Most of the differences between file system types relate to file name length and character restrictions and folder level depth. ISO is the most restrictive and oldest and UDF is the least restrictive newest file type. The complete list of specifications for each is several hundred pages. If you would like to make your burned disc compatible with very old operating systems or other less popular operating systems use the ISO system. If this option is checked the recorder tests a disc for record ability before burning. The drive laser is set to read power and the entire surface is scanned for errors. (DVD+R media cannot be tested) This options can not be used in combination with normal recording or verify. If this option is checked, it compares the copy with the master bit for bit. If the disc is audio or video, the discs may still be playable and the errors may not be detectable by human eyes or ears. Creating Discs 21 This operation may be useful to verify software installation discs where it is extremely important to have accurate copies of all installation files. Checking this option will double the time it takes to record each disc. If this option is checked, all files on the disc will automatically be set to the current time and date. B. 3 Robot Options / Bin Selection Double click on the bin icons at the bottom of the screen to access these settings. [. . . ] After several more seconds, the robotics will undock and the arm will lower. Power will shut off automatically once the robotics are in transport position. If you have the cardboard spacer that was shipped with the unit, replace the spacer inside the unit and close the cover. If you don't have the cardboard spacer, secure the arm and cartridges to the sides of the unit with tape and close the cover. 44 Maintenance and Troubleshooting D. [. . . ]