User manual PROEL BMG1

[. . . ] Thank you for choosing a Proel product, and for your confidence towards our brand, synonymous with professionalism, high quality and reliability. Description Professional table microphone, with die-cast zinc base, high sensitivity condenser microphone capsule, flexible gooseneck, illuminated ring to indicate operating condition, and on/off switch*. [. . . ] Insert two AA 1, 5V batteries in battery compartment under the microphone base, respecting the polarity indicated inside the compartment. Being careful about mounting direction, insert the gooseneck connector on microphone base surface XLR connector and lock the locking threaded ring, without using excessive force. If the external unit microphone input can supply Phantom power, apply it to this microphone by switching Phantom power on. Note: before connecting the microphone to the external unit, it must be turned off and with its volume settings at minimum. First of all turn on the microphone, then the unit and adjust its volume do desired level. In order to obtain a perfect sound reproduction, the user should maintain a distance between 5 cm. If the microphone is placed too close to speaker or its capsule is oriented towards a speaker, it could generate feedback (Larsen effect). Avoid placing the microphone too close to the speaker, and avoid orienting its capsule toward the speaker. IF, despite these practises, you hear feedback, please lower speaker volume. It's important to keep the anti-pop foam clean; foreign particles on the foam could modify frequency response. [. . . ] Technical Specifications Model Microphone type Polar pattern Frequency response Sensitivity Output impedance Power supply Weight BMG1 / BMG1SI Condenser Unidirectional 100Hz-16kHz -37dB±3dB (0dB=1V/Pa a 1kHz) 100 ±30% Phantom power 48V DC or 3V (2 AA batteries) only for BMG1 1, 1Kg (2. Reserve the right to modify product circuitry and appearance at any moment, without prior notice. [. . . ]