User manual PROEL BPLL

[. . . ] Heat: This apparatus should be placed away from heat sources, like radiators, heat registers, stoves or other products (including amplifiers) that produce heat. power sources: · This apparatus should be connected only to power source type specified in this owner's manual or on the unit. If the supplied AC power cable plug is different from the wall socket, please contact an electrician to change the AC power plug. grounding or Polarization: · All precautions must be observed to don't defeat grounding or polarization. [. . . ] To obtain good speakers wire contacts, please tighten the screw terminals firmly. This unit should be placed in a rack (see INSTALLATION) and kept far from: Wet places Direct exposure to heat sources (like sun light) Non properly ventilated places Disconnect the power cord during storms or when the unit is not used. In order to prevent fire and electric shock risks, it's necessary to keep the unit far from sprinkling and drops. Please don't put cups, vases or other object containing liquids over the unit. In case of interferences from source signal, THD value will raise over 10%. Don't place this unit in a bookshelf o in other places with small room. Is not responsible for any damage that occurs due to a wrong unit installation. Thank you for choosing one of Proel products, and for your confidence towards our brand, synonymous of professionalism, accuracy, high quality and reliability. All our products are CE approved and designed for continuous use in professional installation systems. A soft bag supplied with the receiver PLLUD has been designed to house PLLUD, MPLL and PLLUD. This Proel Wireless system operating frequency range covers 144 UHF different frequencies to be selected amongst the following UHF frequency band 798 ÷ The receiver characteristics and performance allows great quality level in each application : metal case of one unit 19" standard racks for rack mounting purposes ( optional fixing kit). the receiver is LCD display equipped for operating frequency , frequency signal intensity , audio output signal and the battery transmitter level visualisation. LCD transmitter displays the battery charge level, the frequency group, the channel frequency. Included in the supply: Antenna , a plastic and anti scratch case and two batteries AA of 1, 5 V 18 hours autonomy in case of continuous use. Body pack transmitter LCD indicates the battery charge level, frequency group and frequency channel. The Body pack Transmitter is supplied with a plastic, anti scratch case plus antenna and two batteries AA 1, 5 V, 18 hours autonomy in case of continuous use. Display Indicated RF signal level, Audio frequency level, battery charge level, the frequency group no and the channel no. MENU Pressing such key the following functions are activated in a cyclic way: GROUP / CHANNEL / PL / MUTE / SQUELCH 5. Antenna A input Insert one of the two antennas included in the supply, screw the metal ring and position vertically 2. XLR Balanced Audio output Such output use is recommended in presence of long distance between PLLUD and the mixer amplifier. 3 Jack Mono Unbalanced audio output To grant a high signal level do not use such output for long distance between PLLUD and the mixer/amplifier . VDC Power Connector Connect AC/DC power supply to VDC and ensure to connect previously to the main power supply 220-230Vac. [. . . ] Some seconds after the last key press, the display return the initial visualisation. when the transmitter is blocked , it is possible to effect the functions scan. The display visualise the current setting without allowing the setting modification: the sole available functions setting is : to power on, to switch off, to set MUTE and lock selection. MUTE function Press for more than one second SELECT key, the MUTE function is activated, Mute word is displayed. [. . . ]