User manual PROGRESS DIAMANT 812.1

[. . . ] · Never remove the mains plug from the socket by pulling on the cable. · Do not use the appliance if: ­ the cable is damaged. · Avoid running over the mains lead with the appliance or the vacuum brush. [. . . ] The brushes can be extended for smooth floors and retracted for carpets. 10 Switching on Switching on and off You can switch the appliance on and off by pressing the On/Off button. Power adjustment: Crevice and upholstery nozzle stored in the appliance For specific cleaning requirements, two additional parts are included with the vacuum cleaner in an integrated accessories compartment*. The nozzles may be attached to the suction tube or the handle on the suction hose, depending on requirements. Power adjustment - Rotary control* The suction power can be varied to suit individual vacuuming requirements using the electronic power adjuster. Crevice nozzle For vacuuming crevices, gaps and corners. Power adjuster ­ Secondary air regulator* Using the regulator on the handle, you can reduce the suction power, e. g. The wider you open the regulator, the lower the suction power at the nozzle becomes Upholstery nozzle For vacuum cleaning all upholstered furniture, mattresses, etc. The thread lifting strips on the nozzle even pick up thread and lint. *depending on model 11 Maintenance and cleaning Prior to maintenance or cleaning, ensure that the appliance is switched off and that the mains plug has been removed from the socket: Bags full of normal household dust may be disposed of with household waste. Insert the new paper filter as far as it will go in the guide rails; only then can the lid be closed. Changing the microfilter We recommend replacing the microfilter at each fifth paper filter replacement, and at the latest when there is a clean dust bag and the dust level indicator is completely red with the nozzle raised. Changing the paper filter The paper filter must be replaced if the window on the filter replacement indicator is completely red when the appliance is operating at maximum power and the nozzle is raised from the floor. The paper filter should be replaced even if it does not appear to be full because fine dust can block the pores in the surface of the filter. Open the lid and fold up. Remove the used microfilter by means of the clean hygienic tabs (figure) and dispose of it with the household waste. Insert the new microfilter and close the cassette. The cover can be opened by pressing the button and folding back until it locks. HEPA filter A highly effective special filter belonging to Class "S". Hygienic filter change: When removing the full filter bag, pull the closing tab to automatically close the opening. HEPA filter ­ further supplies available from Progress customer service. 12 Cleaning As required, wipe the housing and the paper filter compartment with a damp cloth. Occasionally vacuum the floor nozzle and brush-heads with the crevice nozzle. What do I do, if . . . . . . it is difficult to push the nozzle Reduce the power setting on the appliance. [. . . ] Diese können Sie über unser Service Center unter 01801-20 30 90 bestellen. Weitere Informationen erhalten Sie im Internet unter www. progress-staubsauger. de Other Countries Further after sales service In these countries our sales organisations own warranty conditions are applicable. [. . . ]