User manual PROGRESS PC4310

[. . . ] Metal tubes (PC4305) Telescopic tube (PC4310, PC4315) Dual purpose floor nozzle Crevice nozzle Upholstery nozzle with plush plate Dusting brush Dustbag Horizontal parking Vertical parking Accesories on board Before using the appliance, check that the mains power voltage corresponds to the voltage shown on the rating plate. [. . . ] Before you start using the vacuum cleaner, please remove large or sharp objects from the floor in order to prevent damage to the dustbag and hose. Before operating the vacuum cleaner, make certain that the filters are in the proper position. Unwind a sufficient length of cable and insert the plug into the power socket. To rewind the power cable, press the rewind button with your foot, and guide the cable with your hand to ensure that it does not whip causing damage. If you forget to attach the dustbag or attach it in the wrong manner, the dust cover may not close completely. After removing the flexible hose, open the front cover using the compartment open button (fig. The cleaner stops automatically if a blockage occurs in the nozzle/tube/hose or if the filters are blocked with dirt. Disconnect from mains and allow the cleaner to cool for 45-60 minutes. [. . . ] Recycling the appliance at the end of its life: The plastic components all carry a material identification marking so that, like the other materials, they can by recycled at the end of the life of the appliance. [. . . ]