User manual PYRAMID PR532T

[. . . ] U. S. A. PANEL INFORMATION 1 Digital PLL Quartz Tune r TU -3 035 2 4 6 5 9 7 8 3 1. ON/STANDBY SWITCH Press this button to switch "ON" the unit and press again to switch "OFF" unit into "STANDBY MODE". [. . . ] FM stereo broadcasts can be heard in stereo while FM mono broadcast are heard in mono. Normally, the stereo is received when press the stereo/mono knob once. And the mono when the switch is pressed once again, the relative light will be shown on the display. When received stereo signal is too weak, then there will be some noise, you can press the mono key to cut the noise. BAND SWITCH Press this switch to select the broadcast band (AM or FM). AUTO SEARCH SWITCH This switch is used to select AUTO or MANUAL tuning of AM or FM stations. Then press the PRESET STATION switch to enter the tuned station into the memory within 5 seconds. PRESET STATION SWITCHES Up to 9 AM or FM stations may be preset at random. Presetting the switches will allow you to tune in your favorite stations simply and easily. APS Press this switch to allocate and memorize radio station automatically. Note: Once you press this switch, the previous preset stations will disappear. CONNECTIONS FM Antenna (75 ) AM Loop Antenna RISK OF ELECTRIC SHOCK DO NOT OPEN ANTENNA FM 75 AM Loop OUTPUT TUNER INTEGRATED CIRCUIT AC 220~230V 50Hz CD TUNER EQ TAPE PHONO CD AUX VIDEO TUNER PLAY TAPE REC EQ PLAY REC L R * Instructions and requirements indicated may vary to some extent depending on sales area, local law and regulations. Connection precautions * When connecting or re-locating the unit, be sure to turn the power off or disconnect the power cable. [. . . ] * Do not bring the power cord or the speaker cords near the loop antenna since noise will be generated. * Do not bring the loop antenna near the display, otherwise it will affect the reception. SPECIFICATIONS FM Section Tuning range. . . . . . . . . . . . . . . . . . . . . . . . . 87. 5 to 108 MHz Usable Sensitivity Mono IHF. . . . . . . . . . . . . . . . . . . . . . . . . . 12 dB (3. 9 uv) 50 dB quieting sensitivity Mono. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16. 5 dBf Stereo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37. 0 dBf Signal to noise ratio at 65 dBf Mono. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 dB Stereo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 dB Distortion at 65 dBf Mono. . . . . . . . . . . . . . . . . . . . . . . . . . . . . less than 0. 5% at 1, 000Hz Stereo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . less than 2% at 1, 000Hz Alternate channel selectivity (at 400 KHz). . . . . . . . . . . . . . . . . . . . . . . 30 dB Stereo separation. . . . . . . . . . . . . . . . . 40 dB at 1, 000 Hz Frequency response. . . . . . . . . . . . . . 40 to 14 KHz +3. 0 dB, -3. 0 dB Antenna input impedance. . . . . . 300 ohms balanced 75 ohms unbalanced AM (MW) Section Tuning range. . . . . . . . . . . . . . . . . . . . . . . MW: 522 to 1629 KHz (For USA). . . . . . . . . . . . . . . . . . . . . . . . . . . MW: 530 to 1610 KHz Usable sensitivity. . . . . . . . . . . . . . . . . . MW: 68 dB/m (446uVm) Signal to noise ratio. . . . . . . . . . . . . . . 40 dB Image response ratio. . . . . . . . . . . . . . MW: 40 dB at 1, 000kHz Others Output voltage and impedance. 220 mV/2. 2kohms Power requirements Power voltage. . . . . . . . . . . . . . . . . . 230V~50Hz For U. S. A & Canada. . . . . . . . . . 110V~ 60Hz Power consumption. . . . . . . . . . . . watts VA Rated 6 watts maximum Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . 360mm W 87mm H 246mm D Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2. 5 Kg (5. 5 Ibs) net 3. 0 Kg (6. 6 Ibs) packed * Design and specifications are subject to change without notice. [. . . ]