User manual QUATECH SS-CVT-XXX DATASHEET

[. . . ] [. . . ] Featuring data format DIP switching and baud rate auto switching (from 110bps to 115. 2Kbps) users only need to plug the unit and go without software or hardware complicated setting. The RS-485 control is completely transparent to the user and software written for Half-Duplex RS-232 works without any modification. SS-CVT-500I: Photo coupling and DC to DC isolation SS-CVT-500N Specifications Connector ESD protection Signal isolation Power isolation Surge protection Terminator Pin Configuration Cable length Data rate Baud rate LED signals Power range Power consumption Power protection Casing Operating environment Storage temperature Humidity Approvals Dimensions Warranty RS-232: DB9 Male; RS-422/485: 4-screw Terminal Block 15KV None None Yes Auto RS-485: Data +, Data -; RS-422: Rx+, Rx-, Tx1200m (4000 ft) Up to 100Kbps under 1200m Auto detection Rx Transmission, Tx Transmission DC 5V <0. 5W Wrong polarity input protection Plastic case +0 C to +60 C +00C to +700C 5%-95%, non-condensing CE, FCC 55mm X 40mm X 25mm 1 year 0 0 SS-CVT-500I Specifications Connector ESD protection Signal isolation Power isolation Surge protection Terminator Pin Configuration Cable length Data rate Baud rate LED signals Power range Power consumption Power protection Casing Operating environment Storage temperature Humidity Approvals Dimensions Warranty RS-232: DB9 Male; RS-422/485: 4-screw Terminal Block 15KV Photo couple 2KVrms 3KVdc Yes Select for 120 Ohm RS-485: Data +, Data -; RS-422: Rx+, Rx-, Tx1200m (4000 ft) Up to 100Kbps under 1200m Auto detection Power, Tx/Rx Transmission Direction DC 9V to 24V <0. 5 W Wrong polarity input protection Plastic case +00C to +600C +00C to +700C 5%-95%, non-condensing CE, FCC 75 mm X 100 mm X 25 mm 1 year 5675 Hudson Industrial Parkway Hudson, OH 44236 1. 800. 553. 1170 +1330. 655. 9000 www. quatech. com [. . . ] [. . . ]