User manual REMINGTON HC5780

[. . . ] A CAUTION Extended mains only use will result in the reduction of the battery life. , WARNING The appliance can not be operated in corded mode while connected to a PC via the USB port. , CORDLESS USE When the unit is switched on and fully charged, the product can be used in cordless mode for up to 150 minutes. F HOW TO USE , BEFORE STARTING THE CUT • Inspect the clipper making sure that it is free from hair and dirt. [. . . ] F HAIR TEXTURE MECHANISM • Simply adjust the hair texture mechanism by sliding the button at the top of the hair clipper. € Blending different length areas - Select the proper length guard to blend. Slide out the hair texture mechanism (guard) which allows you to blend / thin out the area. € Textured cut – Slide out the hair texture mechanism (guard) to give an all over textured cut. F DUAL BOOST SYSTEM • There are 3 settings for the Dual Boost system: Off, On, Boost. To ensure long lasting performance of your clipper, clean the blades and unit regularly. Indd 6 11/19/2012 12:09:36 PM ENGLISH E After Each Use • Ensure the clipper is switched off and disconnected from the mains. c WASHABLE CLEANING The QUICK WASH SYSTEM is designed to maximise the efficiency of washable cleaning. € Click the buttons that are located on the sides of the hair clipper head. The blades will slide out and the blade set can be easily cleaned under the tap. € Once the blades are cleaned the blades are locked into place by pushing the blade set towards the hair clipper head and will snap into place. € Do not run the entire unit under the tap, only the blade set is meant to be submerged in water. , EVERY SIX MONTHS • At regular intervals the blade set should be removed and cleaned. € If the moving blade has been removed this can be re-fitted by slotting the coated blade holder over the pin in the centre of the interior product head. The groove on the coated blade, just below the teeth, rests on a metal plate at the opposite side to the screw holes. The fixed blade is fitted with the raised profile pointing outwards and fixed with the 2 screws. , Note that if the blades are not correctly aligned then cutting efficiency will be impaired. € Place a few drops of cutter or sewing machine oil onto the blades. A CLEANING CAUTIONS • Only the attachment guide combs and trimmer blade may be removed from the product for cleaning. € Cleaning should be done with a soft brush, such as the brush supplied with the product. € Do not use harsh or corrosive cleaners on the units or their blades. Indd 7 11/19/2012 12:09:36 PM ENGLISH F IMPORTANT SAFETY INSTRUCTIONS Warning – To reduce the risk of burns, electrocution, fire, or injury to persons: • Do not leave the appliance unattended while plugged in. [. . . ] T his guarantee does not include damage to the product by accident or misuse, abuse, alteration to the product or use inconsistent with the technical and/or safety instructions required. T his guarantee shall not apply if the product has been dismantled or repaired by a person not authorised by us. I t’s on the rating plate which can be found on the appliance. F INSTRUKTIONER FOR KLIPNING , For en jævn klipning gives kammen/klingen mulighed for at klippe sig hele vejen igennem håret. [. . . ]