User manual REMINGTON SEVEN

[. . . ] Owner's Manual Instruction Book for: Models 700, Seven & 710 Bolt Action Centerfire Rifles Centerfire Rifles Manual page 2 . . . . . . . . the ten commandments of firearm safety IMPORTANT! READ ALL INSTRUCTIONS AND WARNINGS IN THIS BOOK BEFORE USING THE FIREARM. page 7 . . . . . . . . important parts of the firearm page 9 . . . . . . . . how to load and unload page 12 . . . . . . lubrication and maintenance page 15 . . . . . . how to obtain parts and service 1 A Tradition of Performance and Safety. In 1816 Eliphalet Remington was confident he could make a flintlock that was as good or better than any he could buy. The barrel he handcrafted set a new standard for firearm accuracy and spawned generations of products that have made Remington® Arms America's leading gunmaker. While performance and style are certainly hallmarks of Remington firearms, one factor ultimately drives their performance. Eliphalet Remington never lost sight of the fact that his rifles were potentially lethal and could kill someone if handled improperly. [. . . ] This "J'' slot is the key hole for engaging and disengaging the security system. Also on the sides of the security button you will see a RED and a WHITE indicator dot. When the security button is viewed from the rear of the firearm, the dot indicates whether or not the security system is engaged or disengaged. If the RED dot is visible from the rear of the firearm, the security system is disengaged and the bolt can be cammed into the firing position. (See this page and page 9 for instructions on closing and opening the bolt. ) If the WHITE dot is visible from the rear of the firearm, the security system is engaged and the bolt cannot be cammed into the firing position. To engage the security system the bolt must be installed in the firearm. NEVER ATTEMPT TO ENGAGE OR DISENGAGE THE INTEGRATED SECURITY SYSTEM WHEN THE BOLT IS CAMMED IN THE FIRING POSITION. See Picture 6. CAP J-KEY PICTURE 6 When the white dot is visible from the rear of the firearm the security system is engaged. To disengage the security system, push the key into the "J'' slot with the bolt assembly in the open position. Once the key is in place turn it counter-clockwise as far as it will go. Once the red dot is in place remove the key. THE SECURITY SYSTEM IN NOW DISENGAGED AND THE BOLT CAN BE CLOSED AND CAMMED INTO THE FIRING POSITION. To engage the security system, FIRST ENSURE THAT THE BOLT IS IN THE OPEN POSITION, then push the key into the "J'' slot. THE SECURITY SYSTEM IS NOW ENGAGED AND THE BOLT CANNOT BE CAMMED INTO THE FIRING POSITION. IMPORTANT: ISS will not lock the firearm unless engaged with the bolt open. Do not attempt to engage ISS when bolt is locked up. WHITE DOT PICTURE 7 In operating the security button, NEVER use excessive force to turn the key. If the key will not turn freely, contact a Remington® authorized repair center. DO NOT leave your keys or any ammunition with your firearm, which should be kept unloaded and locked in a safe place. You know you have properly engaged the system when the bolt will not close. If you lose the keys DO NOT attempt to disengage the security system using a foreign object. Even if you think the security system is engaged, careless handling can cause the firearm to fire. BOLT STOP (UP) To Install Bolt Assembly: The bolt assembly locks the cartridge into the chamber. Rotate the bolt stop counter-clockwise to the vertical position (Model 710 only). [. . . ] To locate the Remington Authorized Repair Center nearest you visit our web site at www. remington. com and use our Repair Service Locator. If you need additional on-line assistance, e-mail us at info@remington. com to obtain a listing of Authorized Repair Centers. Contact the Authorized Repair Center of your choice for evaluation of your firearm and/or additional shipping instructions. If your Remington Authorized Repair Center cannot provide the service or repair you require and you need further assistance, please call our toll free number 1-800-243-9700, Mon. -Fri. , 9:00 AM-5:00 PM Eastern time and select the option for repairs. [. . . ]