User manual ROSE DISPLAYS ANOFRAME SQUARE WITH CABLE CLIP AND CABLE AND SAUCER

[. . . ] AnoFrameTM -Square Profile Parts Instruction Sheet Cable and Saucer 16-0018SS Corner brackets AnoFrame rails 12AF100SQ AnoFrame split rails Cable Clips 06-5050 Instructions for assembly 1 Step 1 Insert corner brackets into vertical AnoFrame sides. [. . . ] 5 sliding sides together in the order shown. split rails Step 5 Insert poster. Fig 6. 3 solid rail 4 Figure 5 Figure 6 The AnoFrameTM is a trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INSAnoFrameCableClipSaucer 35 Congress Street, Salem, MA 01970 Tel# 1- 800 631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays. com Incept-9. 27. 02 AnoFrameTM -Square Profile Parts Instruction Sheet Cable and Saucer 16-0018SS Corner brackets AnoFrame rails 12AF100SQ AnoFrame split rails Cable Clips 06-5050 Instructions for assembly 1 Step 1 Insert corner brackets into vertical AnoFrame sides. Split rail side is made up of 2 separate pieces. split rails solid rail 2 Step 2 Place cable onto inner channel of Cable Clip. 3 Figure 1 Figure 2 Step 3 Align one end of the Cable Clip with the top channel of the aluminum holder. Then insert one round end, then press down on the other round end and slide Cable Clip into rail. 4 Figure 3 solid rail w/ Figure 4 Step 4 Assemble frame following steps in. [. . . ] Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. [. . . ]