User manual ROSE DISPLAYS ANOGOTCHA PLUS WITH MULTICLIPS AND REGULAR HOOKS

[. . . ] AnoGotcha Plus Parts Instruction Sheet AnoGotcha Plus Shells 12AG500 Gotcha holder (already inserted into aluminum shells) MultiClips (already inserted into aluminum shell) Regular Hooks Instructions to hang graphic Note: Follow steps 1 through 4 for both the top and bottom holder. Step 1 Rotate one end cap on each AnoGotcha Plusn180°. [. . . ] 6 Note: To change graphic, unhook the holder from the regular hooks and repeat steps 1 through 5. Figure 5 Figure 6 AnoGotcha is a traemark and Gotcha is a registered trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #04INSAnoGotchaPlus 35 Congress Street, Salem, MA 01970 Tel# 1- 800 631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays. com Incept-2. 15. 05 AnoGotcha Plus Parts Instruction Sheet AnoGotcha Plus Shells 12AG500 Gotcha holder (already inserted into aluminum shells) MultiClips (already inserted into aluminum shell) Regular Hooks Instructions to hang graphic Note: Follow steps 1 through 4 for both the top and bottom holder. Step 1 Rotate one end cap on each AnoGotcha Plusn180°. Insert graphic completely into holder until edge of graphic meets top of holder. 4 Note: It is easier to open and close the Gotcha holder by starting at one end and working your way down the holder. With large or curling graphics, it may be easier to insert graphic at one end and slide into holder from one end to another. Figure 1 Figure 2 Figure 3 Figure 4 Step 4 Slide Gotcha into the AnoGotcha Plus and rotate the end cap 180° back to its original position. [. . . ] Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. [. . . ]