User manual ROSE DISPLAYS ANOQUICK ROUND WITH CABLE CLIP AND CABLE AND SAUCER

[. . . ] 1 Step 2 Starting at one corner, push the holder onto the graphic. Work your way down the holder tapping it down firmly to seat the graphic fully. 2 Figure 1 Figure 2 Step 3 Place cable onto inner channel of Cable Clip. [. . . ] 3 Step 4 Align one end of the Cable Clip with the top channel of the aluminum holder. Then insert one round end, then press down on the other round end and slide Cable Clip into rail. 4 Note: For OneUp applications, the AnoQuick holder is conveniently marked in the center. Slide the Cable Clip to the mark. Figure 3 Figure 4 Step 5 Push end caps into place. 6 Important note: Please save and reuse the AnoQuick, Cable Clips, End Caps and MultiClip for future projects. The AnoQuick is a trademark of Rose Displays, Ltd. . Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INSAnoQuickCableClipSaucer Figure 5 Figure 6 Incept-9. 27. 02 35 Congress Street, Salem, MA 01970 Tel# 1- 800 631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays. com AnoQuickTM Instruction Sheet Parts Note: Use only with graphics mounted on 3/16" foamboard or other similar thickness. Can also use a folded edge thinner substrate. AnoQuick 12A300 Cable Clips 06-5050 End Cap 06-5525 Cable and Saucer 16-0018SS Instructions for Hanging Step 1 Prepare edges of graphic. Using the AnoQuick holder, run it across the graphic edge, crushing it slightly. 1 Step 2 Starting at one corner, push the holder onto the graphic. Work your way down the holder tapping it down firmly to seat the graphic fully. 2 Figure 1 Figure 2 Step 3 Place cable onto inner channel of Cable Clip. 3 Step 4 Align one end of the Cable Clip with the top channel of the aluminum holder. Then insert one round end, then press down on the other round end and slide Cable Clip into rail. 6 Important note: Please save and reuse the AnoQuick, Cable Clips, End Caps and MultiClips for future projects. Figure 5 Figure 6 The AnoQuick is a trademark of Rose Displays, Ltd. . Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. [. . . ] 4 Note: For OneUp applications, the AnoQuick holder is conveniently marked in the center. Slide the Cable Clip to the mark. Figure 3 Figure 4 Step 5 Push end caps into place. 6 Important note: Please save and reuse the AnoQuick, Cable Clips, End Caps and MultiClip for future projects. The AnoQuick is a trademark of Rose Displays, Ltd. . [. . . ]