User manual ROTEL RA-1060

[. . . ] Owner's Manual RA-1060 Stereo Integrated Amplifier POWER STEREO INTEGRATED AMPLIFIER RA-1060 VOLUME SPEAKERS PHONES OFF A B A+B L-2 RECORDING OFF TUNER TAPE 1 CD AUX 1 TAPE 2 AUX 2 LISTENING TUNER TAPE 1 CD AUX 1 CONTOUR L-1 OFF H LH AUX1 AUX2 2 AUX RA-1060 Stereo Integrated Amplifier 2 RSX-972 Surround Sound Receiver Cautions WARNING: There are no user serviceable parts inside. WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. If the unit is exposed to moisture, or a foreign object gets into the enclosure, immediately disconnect the power cord from the wall. Take the unit to a qualified service person for inspection and necessary repairs. [. . . ] If you have any questions see your authorized Rotel dealer for advice about the best cable to use with your system. Remote Control The RA-1060 includes an RR-AT92 remote control that operates many of the controls of the RA-1060. In addition, the remote operates basic features of some Rotel CD players, DVD players, and AM/FM tuners. Placement Like all audio components that handle low-level signals, the RA-1060 can be affected by its environment. The heat sinks and ventilation openings in the amplifier are designed to dissipate this heat. There should be 10 cm (4 inches) of clearance around the chassis, and reasonable airflow through the installation location, to prevent the amplifier from overheating. Remember the weight of the amplifier when you select an installation location. We recommend installing the RA-1060 in furniture designed to house audio components. Such furniture is designed to reduce or suppress vibration which can adversely affect sound quality. Ask your authorized Rotel dealer for advice about component furniture and proper installation of audio components. The RA-1060 is supplied with an RR-AT92 remote control and must be placed where the infrared signal from the remote can reach the front panel Remote Sensor. Audio Controls The RR-AT92 duplicates the basic audio functions of the RA-1060 front panel. When a function is available on both the front panel and the remote, a number (see front panel illustration) and a letter (see remote control illustration) are shown in the instructions. For example, to change the volume level, you can on the front panel either turn the control on the remote. When or use the buttons only one identifier appears, that control is available only on the front panel or the remote, but not both. CD Functions The PLAY, STOP, PAUSE, TRACK +/­, RANDOM buttons, and NUMERIC keys (0-10) operate many Rotel CD players after the CD button on the remote has been pressed. DVD Functions The PLAY, STOP, PAUSE, and TRACK +/­, buttons operate Rotel DVD players, after the AUX1 button on the remote has been pressed. 7 English Tuner Functions The BAND, TUNING, and additional tuning feature buttons operate Rotel tuners, after the TUNER button on the remote has been pressed. Alternatively, the remote can be reprogrammed to operate the RT-940AX tuner. This programming only needs to be done once: To program for the RT-940AX: press the POWER button and the 2 button simultaneously. To program for the RT-955: press the POWER button and the 1 button simultaneously. Speaker Outputs See Figure 2 The RA-1060 has two sets of speaker outputs, labeled SPEAKER A and SPEAKER B. The speaker outputs are controlled by the switch on the front panel. Speaker Connections Turn off all the components in the system before connecting the speakers. (In non-EC markets, the connectors also accept dual banana plugs. ) Route the wire from the RA-1060 to the speakers. Give yourself enough slack so you can move the components to allow access to the speaker connectors. Your authorized Rotel dealer can help in the selection of cables for your system. To use the remote, aim it at the remote sensor on the front panel of the RA-1060. NOTE: Remote Control Batteries Two UM-4/AAA size batteries (supplied) must be installed before the remote control can be used. To install the batteries, remove the cover on the back of the RR-AT92. Install the batteries as shown in the illustration in the battery well. When the batteries become weak the remote control won't operate the RA-1060 consistently. [. . . ] Contact your authorized Rotel dealer, to get the correct adapter plug. NOTE: Plugging in headphones does not cut off the signal to the speakers. If desired, use the SPEAKERS selector to turn off the signal to the speakers for private listening. Troubleshooting Most difficulties in audio systems are the result of incorrect connections, or improper control settings. If you encounter problems, isolate the area of the difficulty, check the control settings, determine the cause of the fault and make the necessary changes. If you are unable to get sound from the RA-1060 refer to the suggestions for the following conditions: Power Indicator Is Not Lit The power indicator should be lit whenever the RA-1060 is plugged into the wall power outlet and the POWER switch is pushed in. [. . . ]