User manual ROTEL RCC-935

[. . . ] Do not place the unit on a bed, sofa, rug, or similar surface that could block the ventilation slots. If the unit is placed in a bookcase or cabinet, there must be sufficient clearance around the unit and ventilation of the cabinet to allow proper cooling. Keep the unit away from radiators, heat registers, stoves, or any other appliance that produces heat. This symbol is to alert the user to the presence of uninsulated dangerous voltages inside the product's enclosure that may constitute a risk of electric shock. [. . . ] unless one of the Repeat Play functions has been selected: · After the last track on discs 1 through 4 is played, the next disc is selected and play continues with track 1 of the disc. Press the Pause Button again, or the Play Button, to resume playing the disc at the same track and time. The disc will remain selected but the track selection will go back to track 1. When a disc is not playing: · press the button to select the next track on the disc. when a disc is playing: · Press the button to skip the rest of track being played and begin playing at the beginning of the next track on the disc. ⷠPress the button to return to the beginning of the track being played. To select tracks higher than number 10 use the ">10" button. For example, to select track 17, press the ">10" button then the "7" button. Press and hold the or buttons to quickly search a disc in the forward or reverse direction. For the first five seconds the search speed will be approximately four times normal playing speed. After three seconds the search speed will increase to approximately 20 times normal playing speed. the Search buttons function normally when the Repeat 1 Track option is selected. You can search forward to the next track, and backward to the previous track. If the Programed Play feature is being used the Repeat 1 Track feature cannot be selected. When a disc is selected, but not playing, the Time Display shows the total playing time of the disc and the number of tracks on the disc. When a disc is playing, the Time Display shows the track number and the amount of time the track has been playing. The Time Display shows the amount of time remaining on the track that is playing. The Track Indicator shows the number of tracks remaining to be played. The Disc Display changes from the number of the disc that is playing to a "­". Pressing the Time button when the Total/Remain mode is selected changes the Time/Track Display back to the Normal Display mode. The Time/Track Display also reverts to the normal display mode when disc play is stopped and started again. When the Repeat All Discs option is selected the "Repeat All Disc" indicators in the display are lit. [. . . ] The track skip function will not go past the first or last programmed track unless the Repeat play function is turned on. If you search to the end of the track the next programmed track is played. If you search to the end of the last programmed track play stops unless the Repeat function is turned on. Pressing the button searches backwards, but the search will not go beyond the beginning of the track that is playing. [. . . ]