User manual ROTEL RDV-1050

[. . . ] 10-10 Shinsen-Cho Shibuya-Ku Tokyo 150-0045 Japan Phone: +81 3-5458-5325 Fax: +81 3-5458-5310 Rotel of America 54 Concord Street North Reading, MA 01864-2699 USA Phone: +1 978-664-3820 Fax: +1 978-664-4109 Rotel Europe Dale Road Worthing, West Sussex BN11 2BH England Phone: +44 (0)1903 221 600 Fax: +44 (0)1903 221 525 Rotel Deutschland Kleine Heide 12 D-33790 Halle/Westf. Germany Phone: +49 05201-87170 Fax: +49 05201-73370 www. rotel. com RDV-1050 DVD Player 082 OMRCD1050-US 020404 RDV-1050 DVD Player 2 Important Safety Instructions WARNING: There are no user serviceable parts inside. WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. If the unit is exposed to moisture, or a foreign object gets into the enclosure, immediately disconnect the power cord from the wall. [. . . ] · When playing a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals from your speakers. ANALOG OUTPUT To correctly play the audio on a DVD VIDEO disc recorded with surround multichannel audio, you must set this item properly according to your audio system configuration. (This function does not work when the VSS function is activated. ) Setting options: 2-CH DOLBY SURROUND, 2-CH STEREO, MULTI CHANNEL 2-CH DOLBY SURROUND: select when listening to multichannel surround audio with the analog AUDIO OUT terminals of the RDV-1050 connected to a surround decoder. 2-CH STEREO: select when listening to conventional two-channel stereo audio with the AUDIO OUT terminals of the RDV-1050 connected to a stereo amplifier/receiver or television set, or in case you want to record the audio from a DVD VIDEO disc to MiniDisc, cassette, etc. MULTI CHANNEL: select when listening to multichannel surround audio in a system where the 5. 1 audio outputs of the RDV-1050 are connected to an amplifier equipped with 5. 1 channel inputs. D. RANGE CONTROL This setting provides optimal audio quality from the analog AUDIO OUT terminals when listening to DVD VIDEO discs recorded in Dolby Digital format, at low or middle volume. Setting options: WIDE RANGE, NORMAL, TV MODE WIDE RANGE: when selected, audio is played back with the widest dynamic range so that you can enjoy powerful playback sound. TV MODE: select if DVD Video disc sound level is lower than TV program sound level. OUTPUT LEVEL This setting allows you to attenuate the level of the signal output from the analog AUDIO OUT terminals of the RDV-1050. Setting options: STANDARD, LOW If the sound output from the speaker is distorted, select LOW. SPK. SETTING menu This menu can be selected only when ANALOG OUT in the AUDIO preference display is set to MULTI CHANNEL. MODE: You can select the speaker configuration type according to your speaker systems. Setting options: 5. 1 CH. , EXPERT 5. 1 CH. : select when you connect the unit to a 5. 1-channel amplifier and use the front, surround, center and subwoofer speakers. EXPERT: Select when you want to adjust the audio output of the RDV-1050 to match the characteristics of your speakers. See the "Fine Tuning for Your Speakers" section that follows for information on how to adjust these three items. 6 Press / to select a desired analog output signal type. Set this item correctly when you play back a DVD VIDEO disc recorded with surround multichannel audio. · When connecting to a surround decoder, select 2-CH DOLBY SURROUND. Screen Saver You can turn the screen saver ON or OFF. Setting options: ON, OFF MP3 and WMA/JPEG The RDV-1050 can play MP3/WMA and JPEG files recorded on a CD-R/CD-RW disc. However, if a disc contains both MP3/WMA and JPEG files, you can only play files of the type selected in this menu. Setting options: MP3 & WMA, JPEG MP3 & WMA: when selected, only MP3/ WMA files can be played back. JPEG: when selected, only JPEG files can be played back. The following messages may appear at the bottom of the opening display. · NOW READING (The RDV-1050 is reading the disc information. ) · REGION CODE ERROR! [. . . ] (For example, to specify "10, " press 1, then 0. ) 3 Press ENTER 35 to begin playback from the specified chapter. Audio Selection During playback, selects the audio language or sound track. 3 Press ENTER 35 to begin playback with the selected audio. Selected preset USER 1 GAMMA BRIGHTNESS CONTRAST SATURATION TINT SHARPNESS Y DELAY +4 +4 +13 +13 +13 +3 +2 ACTION: Suitable for action movies and sports programs in which the sound source moves. THEATER: You can enjoy sound effects like in a theater. Quantization bit length Sampling frequency Parameter 5 Press / 32 14 to adjust the level of the parameter. [. . . ]