User manual ROTEL RE-1010

[. . . ] If the unit is exposed to moisture, or a foreign object gets into the enclosure, immediately disconnect the power cord from the wall. Take the unit to a qualified service person for inspection and necessary repairs. Heed all warnings and safety information in these instructions and on the product itself. You must allow a minimum 10 cm or 4 inches of unobstructed clearance around the unit. [. . . ] Dolby Digital Surround EX recordings also trigger automatic decoding (although not all Surround EX DVDs have the necessary flag and may require manually activating Surround EX decoding). Likewise, a digital input from a standard compact disc, a DTS 96/24 disc, or DTS-ES 96/24 disc, will be auto-detected and properly decoded to 2CH stereo operation. Dolby Pro Logic IIx or Rotel XS processing can be configured to be automatically active in all 6. 1 or 7. 1 channel systems configured with center back speaker(s) and will ensure proper extended surround decoding of all multichannel digital signals, even those that might not otherwise trigger the proper extended surround mode. In many cases, the receiver will also recognize a digital signal with Dolby Surround encoding (such as the default soundtrack on many DVDs) and activate Dolby® Pro Logic II® decoding. Additionally, you can configure a · 5-channel or 7-channel stereo from 2-channel recordings. · One of four DSP modes for DSP concert hall simulation from 2channel music recordings. · Dolby Pro Logic II cinema or music mode matrix decoding of 2channel recordings. · DTS Neo:6 cinema or music mode matrix decoding of 2-channel recordings. RE-1010 English v2. indd 32 27/8/08 14:22:16 English 33 · Dolby Digital Surround EX decoding of Dolby Digital 5. 1 channel recordings or Dolby Digital Surround EX discs that do not trigger automatic decoding. Note: DTS, DTS-ES Matrix 6. 1, DTS-ES Discrete 6. 1, DTS 96/24, DTS-ES 96/24 and Dolby Digital signals are auto-detected and cannot be overridden. However, you can choose to use Dolby Digital Surround EX decoding for any Dolby Digital 5. 1 source material. You can also downmix Dolby Digital 5. 1 or DTS 5. 1 recordings for 2-channel playback. · PCM 2-channel (non 96kHz) digital signals can be overridden to Dolby Pro Logic II, Dolby 3-Stereo, DTS Neo:6, DSP 1­4, 5CH Stereo, 7CH Stereo, and Stereo. · Dolby Digital 2-channel Stereo can be overridden to Dolby Pro Logic II, Dolby 3-Stereo, and Stereo. For standard 5. 1 channel discs, Dolby Pro Logic IIx Music or Rotel XS processing will provide a more diffused surround effect than the more highly localized Dolby Note: When playing any Dolby Digital source, you can select one of three dynamic range control settings. See the Dynamic Range topic in the Other Settings section of this manual. DTS 5. 1 discs DTS 96/24 discs DTS-ES 6. 1 discs =TVW DTS decoding is auto-detected and cannot be overridden. You may, however, select a 2-channel downmix of 5. 1 channel recordings or add Rotel XS center back processing for 5. 1 channel discs. Note: In addition to the options that follow, you can press the 2CH button on the remote to toggle between 2-channel downmix and multichannel playback. · On a 5. 1 system. Press the SUR+ button on the remote, then press the +/­ buttons to change between DTS 5. 1 channel or DTS 2. 0 channel downmix playback. Press the SUR+ button on the remote, then use the +/­ buttons to step through the optional modes: DTS 2. 0 channel downmix, DTS 5. 1 channel, DTS with Rotel XS center back processing, DTS with Pro Logic IIx Music center back processing, or DTS with Pro Logic IIx Cinema center back processing RE-1010 English v2. indd 33 27/8/08 14:22:17 34 RE-1010 Surround Sound Receiver (available only for 7. 1 channel systems). Selecting DTS 5. 1 forces the center back channel processing off for conventional 5. 1 channel playback. You can also repeatedly press the DTS Neo:6 button on the front panel until the desired option is selected. Press the SUR+ button on the remote, then use the +/­ buttons to step through three optional modes: DTS 2. 0 channel downmix, DTS 5. 1, or DTS-ES 6. 1ch/7. 1ch playback. On the front panel, press the DTS Neo:6 button while playing a DTS source to step through the same options. Press the SUR+ button on the remote, then use the +/­ buttons to step through the optional modes: DTS 2. 0 channel downmix, DTS 96, or DTS 96 with Rotel XS center back processing. You can also repeatedly press the DTS Neo:6 button on the front panel until the desired option is selected. · To select DSP multichannel modes for 2-channel digital recordings. [. . . ] HDMI (High-Definition Multimedia Interface) is an advanced type of connection which carries both video and audio in a single cable. It is a modern digital replacement for older analog video connection standards such as Composite Video, S-Video and Component Video. This Rotel unit meets the latest version of HDMI specification, HDMI 1. 3. An earlier digital connection standard, DVI (Digital Visual Interface) can also be used for high-definition video signals by means of a suitable adaptor. [. . . ]