User manual ROTEL RSX-1057

[. . . ] Owner's manual Surround Sound Receiver RSX-1057 II > 10 cm > 4 in SURROUND SOUND RECEIVER RSX-1057 STANDBY > 10 cm > 4 in VOLUME 1 2 3 4 5 TUNING BAND CD TUNER TAPE1 VIDEO1 VIDEO2 VIDEO3 VIDEO4 VIDEO5 > 10 cm > 4 in 6 7 8 9 0 DIRECT MONO MEMORY 2CH PLIIx MODE DTS Neo 6 DSP MULTI INPUT MUTE ZONE REC > 10 cm > 4 in Rotel products are designed to comply with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates compliance and that the products must be appropriately recycled or processed in accordance with these directives. This symbol means that this unit is double insulated. An earth or ground connection is not required. Notice The COMPUTER I/O connection should be handled by authorized person only. Important Safety Instructions WARNING: There are no user serviceable parts inside. WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. [. . . ] You should typically select Surround EX or discs that are labeled Dolby Digital Surround EX. For standard 5. 1 channel discs, Dolby Pro Logic IIx Music or Rotel XS processing will provide a more diffuse surround effect than the more highly localized Dolby EX decoding and will probably be the better 6. 1 channel options for non-Surround EX discs. Selecting DD 5. 1 forces the center back channel processing off for conventional 5. 1 channel playback. You can also repeatedly press the DOLBY PLIIx Mode button on the front panel until the desired center back channel option is selected. Press the SUR+ button on the remote, then use the +/­ buttons to step through six options: DD 2. 0 channel downmix, DD 5. 1 channel, DD Surround EX center back processing, DD with Pro Logic IIx Music center back processing, DD with Pro Logic IIx Cinema back channel processing, or DD with Rotel XS center back processing. You should typically select Surround EX or discs that are labeled Dolby Digital Surround EX. For standard 5. 1 channel discs, Dolby Pro Logic IIx Music or Rotel XS processing will provide a more diffused surround effect than the more highly localized Dolby EX decoding and may be the better 7. 1 channel options for non-Surround EX discs. Selecting DD 5. 1 forces the center back channel processing off for conventional 5. 1 channel playback. You can also repeatedly press the DOLBY PLIIx Mode button on the front panel until the desired center back channel option is selected. When playing any Dolby Digital source, you can select one of three dynamic range control settings. See the Dynamic Range topic in the Other Settings section of this manual. Dolby Digital 2. 0 discs Dolby Digital decoding is auto-detected and cannot be overridden. You may, however, select 2-channel playback, 5. 1 channel playback with Pro Logic II matrix surround, 6. 1/7. 1 channel playback with Pro Logic IIx matrix surround, or Dolby 3-Stereo playback. Press the SUR+ button on the remote, then use the +/­ buttons to step through four options: DD 2. 0 channel, DD with Pro Logic II Cinema matrix surround, DD with Pro Logic II Music matrix surround, or Dolby Digital 3 channel stereo. You can also repeatedly press the 2CH button on the front panel or the remote to select the same options. Press the SUR+ button on the remote, then use the +/­ buttons to step through four options: DD 2. 0 channel, DD with Pro Logic IIx Cinema matrix surround, DD with Pro Logic IIx Music matrix surround, or Dolby Digital 3 channel stereo. You can also repeatedly press the 2CH button on the front panel or the remote to select the same options. · To select Cinema or Music options in Pro Logic II or Pro Logic IIx modes. Press the SUR+ button twice while in Pro Logic II or Pro Logic IIx modes. Then, use the +/­ buttons to select the Music or Cinema options. NOTE : DTS, DTS-ES Matrix 6. 1, DTS-ES Discrete 6. 1, DTS 96/24, Dolby Digital, MP3, MPEG Multichannel, HDCD (96kHz), and PCM 2-channel (96kHz) digital signals are auto-detected and cannot be overridden. However, you can choose to use Dolby Digital Surround EX decoding for any Dolby Digital 5. 1 source material. You can also downmix Dolby Digital 5. 1 or DTS 5. 1 recordings for 2-channel playback. · HDCD (non 96kHz) and PCM 2-channel (non 96kHz) digital signals can be overridden to Dolby Pro Logic II, Dolby 3-Stereo, DTS Neo:6, Music 1 ­ 4, 5CH Stereo, 7CH Stereo, and Stereo. · Dolby Digital 2-channel Stereo can be overridden to Dolby Pro Logic II, Dolby 3-Stereo, and Stereo. [. . . ] · Make sure that digital input connector is assigned to the proper source input and that the source input is configured to use the digital input rather than an analog input. · Check the configuration of the DVD player to ensure that the bitstream and/or DTS digital output is activated. Composite video connections can only send video from Composite sources and S-Video connections can only send video from S-Video sources. · HDMI connections can only send video signals from HDMI sources. [. . . ]