User manual ROTEL RT-820

[. . . ] Read all the instructions before connecting or operating the component. Heed all warnings and safety information in these instructions and on the product itself. You must allow 10 cm or 4 inches of unobstructed clearance around the unit. Do not place the unit on a bed, sofa, rug, or similar surface that could block the ventilation slots. [. . . ] If "DIMMER AUTO" is selected, the setting automatically changes to "DIMMER OFF" while a non-video disc is being played. The display goes back to the "DIMMER AUTO" setting when play is stopped. NOTE: With some DVD and Video CD discs, you may not be able to control them according to the instructions described in this manual, because of the contents of the disc. If a DVD VIDEO with an improper Region Code number is loaded, "REGION CODE ERROR!" appears on the TV screen and playback cannot start. RT-820 DVD Player 12 Playing a DVD or CD Press ^ OPEN/CLOSE o6 to open the disc tray. Place smaller 8 cm/33/16" dics in the recessed, inner part of the disc tray. Playing Other Discs After a disc is loaded, an on-screen display is shown. The sample menu screen shown below is what appears when an MP3 disc is loaded. With a JPEG disc "File" is shown on the right side instead of "Track". Display Window The information in the diaply window changes, depending on the type of disc that is loaded and the operating mode of the RT-820. DVD VIDEO/DVD AUDIO/DVD VR When a disc is playing Title/group/ Chapter/ original track program/play number list number Elapsed playback time Press ^ again to close the tray. (See Playable Discs section. ) When placing a disc on the disc tray, be sure to set it in the recess. Otherwise, the disc may be damaged when the disc tray is closed, or you may not be able to remove the disc from the RT-820. · When a DVD AUDIO is played back, "GR" and "TR" are displayed instead of "TITLE" and "CHAP". · When a DVD VR is played back, "VR" is displayed and "PG" (original program) or "PL" (play list) is displayed instead of "TITLE". · If "B. S. P. " is displayed during DVD AUDIO playback, refer to the "Browsable Still Pictures" section of this manual. When a disc is stopped On-Screen Menu After loading a DVD VIDEO, SVCD or Video CD disc, a menu may appear on the TV screen. NOTE: The Resume function must be turned on in order for this function to work. If the feature does not work as described here check "Preference Menu / Others Menu" section of this manual. This menu can also be used to turn off the Resume Playback feature if you want to. STOP button is pressed twice "RESUME" will disappear from the display and the stored location will be cleared. · The position where playback starts again may be slightly different from the stopped position. · The location where playback was stopped is remembered even if the RT-820 is turned off. · This function does not work in program playback or random playback. · When the menu screen is displayed, the resume playback function may not work. · The audio language, the subtitle language and the viewing angle are stored with the stopped position. · The stored position will be cleared if the disc tray is opened. After selecting the track you want press ENTER 8 . With some discs playback may start without pressing ENTER. ­(moving images only) To skip to the beginning or end of a track (or chapter or file), while a disc is playing, press { } PREVIOUS/NEXT yu. [. . . ] An image with a resolution of more than 8192 x 7680 pixels cannot be displayed. · The system supports ASF files recorded with the maximum bit rate of 384 kbps and an audio coder decoder of G. 726. · The maximum size of the playback picture is 352 x 288 pixels (CIF). Notes on MPEG1/MPEG2 discs and files · The stream structure of MPEG1/MPEG2 discs and files should conform to MPEG system/program stream. [. . . ]