User manual ROTEL RTC-950AX

[. . . ] Read all the instructions before connecting or operating the component. Heed all warnings and safety information in these instructions and on the product itself. You must allow a minimum 10 cm or 4 inches of unobstructed clearance around the unit. Do not place the unit on a bed, sofa, rug, or similar surface that could block the ventilation openings. [. . . ] The RTC-950AX can play discs encoded in either the NTSC or PAL video formats, outputting the correct video signal as set by the back-panel NTSC/PAL switch. Digital Audio Formats DVD and CD discs can be encoded with several different digital audio formats. Generally, the type of digital audio encoding is indicated on the disc packaging. A digital surround format that may contain as many as five discrete audio channels plus an LFE (low frequency effects) channel (referred to as 5. 1 channel surround). Particularly for older sound tracks, Dolby Digital may be used for a 2. 0 channel stereo sound track with Dolby Surround matrix encoding. Another 5. 1 channel digital surround format similar to Dolby Digital, but somewhat different encoding characteristics. Another compressed digital format. The RTC-950AX has a master POWER switch on the front panel. When this button is in the out position, the unit is off and cannot be turned on from the remote. When the front panel POWER button is pressed in, the unit becomes fully activated. With the master POWER button in the ON position, the unit can be activated or put in a standby mode from the remote. NOTE: In normal use, the front panel POWER button should be left in the IN position. The LED above the front panel POWER button lights whenever the POWER button is in the on position. The PLAY / button usually starts play from the beginning of the disc, except after the PAUSE , button has been pressed. The RTC-950AX also has a resume feature that restarts play at the current location after pressing the STOP . button once during playback. Playing a Disc The TRACK { } buttons skip forward/back to the beginning of the next selection. While a disc is playing, pressing the right TRACK { } button once advances to the beginning of the next Chapter or Track. Pressing the left button returns to the beginning of the current scene or song. Pressing twice in quick succession returns to the beginning of the previous Chapter or Track. Press the button as many times as necessary to find the desired scene or selection. For a DVD-Video disc: During playback, this feature usually skips to the next Chapter, although it may skip to the next Title on some discs, depending on the disc configuration. For an Audio CD or DVD-Audio disc: While the disc is playing or stopped, this feature skips to the next Track. NOTE: There are other methods of locating specific selections on a disc, including direct access with the NUMERIC buttons and using the On-Screen Menu features. See Playing Specific Selections for details. Skip forward/back NOTE: The sound is muted during slow-motion play. [. . . ] If not, use one of the manual settings: · AUTO: The DVD player detect information from the TV Monitor and selects the correct color space automatically. (default) · RGB: Use when your HDMI connected digital TV monitor supports the RGB color format. · YCrCb 4:2:2: Use when your HDMI connected digital TV monitor supports YCrCb 4:2:2 color. · YCrCb 4:4:4: Use when your HDMI connected digital TV monitor supports YCrCb 4:4:4 color. HDMI Color Format MORE INFORMATION Troubleshooting If you are experiencing difficulties, consult the following list for possible solutions: Power Power does not come on. [. . . ]