User manual RUSSELL HOBBS 14043

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual RUSSELL HOBBS 14043. We hope that this RUSSELL HOBBS 14043 user guide will be useful to you.


RUSSELL HOBBS 14043 : Download the complete user guide (139 Ko)

Manual abstract: user guide RUSSELL HOBBS 14043

Detailed instructions for use are in the User's Guide.

[. . . ] cleaning the car), connect it to the electricity supply via a residual current device (RCD), with a rated residual operating current not exceeding 30mA. 8 Keep an eye on the cable, so it doesn't catch on anything, or trip anyone up. 9 If you're using the cleaner on stairs, sit it where it can't topple, and keep it below you, so if it does topple, it won't land on you. 11 Unplug the cleaner and rewind the cable when not in use, before moving and before cleaning. [. . . ] Press the rear of the brush pedal to extend the bristles for hard floors, or floor coverings without pile. Press the front of the brush pedal to retract the bristles for use on rugs, carpets, and anything with pile. crevice tool as the name implies, down the sides of upholstery, in awkward spaces, nooks, and crannies nothing else can reach. small brush use it to remove pet hair, lint, and dust from blinds, curtains, and upholstery; to brush/clean awkward corners. To use, turn it a bit more than 90° from the crevice tool, to store, turn it back, parallel to the crevice tool. It can be stored in a niche at the rear of the cleaner. tubes 15 Fit the extendable tube for floors, carpets, or for those hard to reach places: a) grip the end of the inner tube in one hand, the outer tube in the other b) turn your right hand quarter of a turn anti-clockwise to unlock the tubes c) move the inner tube in or out to the length you require d) turn your right hand quarter of a turn clockwise to lock the tubes 16 Push the wide end of the extendable tube on to the nozzle. 17 Choose a tool, and push it onto the narrow end of the tube. suction control 18 The suction control is on the nozzle ­ move it towards the nozzle for maximum suction, away from the nozzle to reduce suction. plug in caution If you've accidentally pressed the on/off switch, the cleaner could come on when you plug it in. 19 Plug the cable into a socket near the area to be cleaned (switch the socket on, if it's switchable). 20 Press and release the on/off switch 3, to turn the cleaner on. switching on cleaning 21 Move the tool over the surface, cleaning a small area at a time. 22 When you move to a new area, overlap the previous area, to make sure none of the surface is missed. switching off 23 If you've finished, if you want to change tools, or if you just want to stop, press and release the on/off switch 3, to turn the cleaner off. 26 Stand clear of the cable, and press the cable rewind button, the cable will rewind back into the cleaner. 5 finished cleaning? 27 Keep clear of the cable, as it rewinds at a fair lick. If it catches on anything, stop pressing, and it'll stop rewinding. 28 We've tried not to make it too powerful, to avoid wrecking your home, so you may need to push the plug end into the storage area manually. removing and emptying the bin 29 You don't have to empty the bin after each use, but it's a very good idea. Your cleaner will happily work till it's chock full, but you'll be wasting energy swirling yesterday's dust around. 30 Switch off, unplug, and leave it for a minute, to let the dust settle. 31 Squeeze the locks on the hose end, and pull the hose out of the cleaner ­ this'll keep the hose out of your way. Use the other hand to raise the bin handle, then lift the bin up and out of the cleaner. 33 Lower the bin into your dustbin so it's below the rim ­ this'll stop the dust dispersing into your environment. The bottom of the bin will drop open, and the contents will drop into the dustbin. 35 Tap the bin lightly (over the dustbin) to dislodge any remaining dust. 36 Check the inlet for blockages, if there are any, give the bin a few taps to dislodge it. [. . . ] Don't use harsh or abrasive cleaning agents or solvents. timing · Cleanthecleanerfrequently. Basically, thebetteryoulookafterit, thelongerit'lllast. Keep an eye on it as you use it, and examine the filters when you empty the bin. If anything needs cleaning, do it there and then, don't put it off, in case you forget. · Wipeexternalsurfaceswithadampcloth. Adabofwashing-upliquidwillremove stubborn stains, but clean it off afterwards, or it may stain. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE RUSSELL HOBBS 14043




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual RUSSELL HOBBS 14043 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.