Detailed instructions for use are in the User's Guide.
[. . . ] 15 Keep the smoothie maker and cable away from hotplates, hobs or burners. If liquid gets under the motor unit, it may be sucked into the motor, damaging it. 17 Don't fill the jug above the 1800ml/max mark if you do, the contents may force the lid off when you start the motor. 18 Don't run the motor for more than 3 minutes, or it may overheat. [. . . ] 28 Press 2, and wait till the blades stop moving before removing the lid from the jug, or removing the jug from the motor unit.
finished?the tap
29 You can rotate the tap lever to whatever side or angle you find convenient. 32 When dispensing thick smoothies, it helps to run the motor at low speed (1). 33 When dispensing thick smoothies, remember that you'll need one hand for the tap, and one for the stirrer, so find a stable, flat-bottomed glass, cup, or container, to sit on the work surface, under the tap, for the smoothie.
5
hot liquids
34 No matter how careful you are when using the smoothie maker, some splashing is inevitable. In extreme cases, they may scald, so, when using hot liquids: a) before pouring into the smoothie maker, let the liquid cool down to the sort of temperature you can handle comfortably b) run the motor only when the cap is fitted to add ingredients, stop the motor, remove the cap, add the ingredients, replace the cap, then re-start the motor c) put a hand on the cap and lid, to hold them in place while blending d) if the lid is too hot for comfort, stop the motor, remove the lid, and let the liquid cool down further replace the lid before blending
crushed ice
35 If you're making crushed ice for cocktails, make sure the smoothie maker is clean, then rinse it out thoroughly. The slightest trace of detergent will flatten any drink to which it is added. 37 Put half to threequarters of a cup of ice into the smoothie maker, then add 1 tablespoon (15ml) of fresh cold water. 38 Put the lid on the smoothie maker, then press the f button 3 or 4 times, with short pauses between. Too much blending will reduce the ice to liquid, too little will merely chip the edges/corners off the ice. 41 Don't be tempted simply to increase the amount of ice and blend for longer. Too much ice will never give you satisfactory results.
care and maintenance caution take great care handling the blade unit the blades are sharp
1 Switch off (2) and unplug before cleaning. 2 Clean as soon after use as possible, to prevent residues setting inside the jug. 3 Turn the jug and base about an eighth of a turn anti-clockwise to release the base from the motor unit, then lift the jug and base off the motor unit. 5 Unscrew the tap from the jug it takes 2 complete turns to unscrew. 6 Unscrew the lever and its retaining ring from the tap this takes about 22 turns. 8 Hold the jug base firmly with one hand, hold the jug handle with the other. 9 Turn the jug, to bring the q on the transparent part of the jug over the open padlock U on the top of the jug base. 10 Carefully lift the transparent part of the jug away from the jug base. 13 If they really do need cleaning, the blade unit and seal may stick to the transparent part of the jug. 6
14 If this happens, turn the transparent part of the jug upside down and lift the blade unit and seal off with your fingernails. 15 Wash the cap, lid, stirrer, tap parts, jug, jug base, blade unit, and seal in warm soapy water, and leave them to drain dry. You may leave lint on the inside surfaces, and you'll probably cut yourself on the blades. [. . . ] Run at low (1) for 10 seconds, then high (2) for 10 seconds.
pina colada
200ml pineapple juice 100ml malibu 30ml single cream 4 ice cubes Put everything into the jug, ice cubes last. Run at low (1) for 15 seconds, then high (2) for 10 seconds.
11
connection
The product doesn't need an earth. Don't use a nonrewireable/moulded plug unless the fuse cover is in place. If you remove the plug, dispose of it.
wheelie bin symbol
To avoid environmental and health problems due to hazardous substances in electrical and electronic goods, appliances marked with this symbol mustn't be disposed of with unsorted municipal waste, but recovered, reused, or recycled.
service
If you ring Customer Service, please have the Model No. [. . . ]