User manual RUSSELL HOBBS 14684

[. . . ] 5 Don't use the kettle without the filter in place ­ it may spit boiling water. 8 Take care when pouring ­ pour slowly, and don't over-tilt the kettle. 9 Don't switch on unless the kettle contains at least 2 cups of water. [. . . ] 11 Move the switch to 1 ­ the light will glow, and the kettle will heat up. switching off 12 When the water boils the kettle will switch off and the light will go out. 13 To switch off manually, move the switch to 0, or simply lift the kettle off the stand. general 14 Remove the kettle from the stand before pouring. 15 To avoid the risk of splashing, pour slowly and don't over-tilt the kettle. 16 Don't tilt the kettle backwards ­ water might get on to the control area. If this happens, let the kettle dry before use ­ sit it somewhere warm for 12 hours. Don't worry ­ it's the steam used to switch the kettle off automatically, which then condenses and escapes via vents under the kettle. using with insufficient water 18 This will shorten the life of the element. 20 To prevent the kettle cycling on and off, remove it from the stand and sit it on the work surface till it's cold. 21 Don't fill the kettle till it's cold, or it may spit. care and maintenance 1 Check that the kettle is switched off ­ move the switch to 0. You may use a little household detergent, but if you do, rinse well to avoid tainting the water. 6 Don't use harsh or abrasive cleaning agents or solvents. descale regularly ­ even in soft water areas 7 Limescale may be white, coloured, even rusty-looking, but it's normally visible. 8 Phosphate scale isn't generally visible, but it's there, even in soft water areas. 9 All scale causes overheating, reduces the kettle's life, and may trigger the boil-dry cut-out. 10 So, even with soft water, descale regularly, to help keep your kettle in working order. 11 Use a descaler suitable for plastic products (all kettles have plastic parts). 12 Follow the instructions provided with the descaler, rinse several times, then fill, boil and discard the water, to ensure no residues are left. , Products returned under guarantee with faults due to scale will be subject to a repair charge. 4 water filter 13 Scale particles suspended in the water may give it a cloudy or greasy appearance. [. . . ] If that doesn't solve the problem ­ ring Customer Service ­ they may be able to offer technical advice. If they advise you to return the product to us, pack it carefully, include a note with your name, address, day phone number, and what's wrong. If under guarantee, say where and when purchased, and include proof of purchase (till receipt). [. . . ]