User manual RUSSELL HOBBS 14835

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual RUSSELL HOBBS 14835. We hope that this RUSSELL HOBBS 14835 user guide will be useful to you.


RUSSELL HOBBS 14835 : Download the complete user guide (178 Ko)

Manual abstract: user guide RUSSELL HOBBS 14835

Detailed instructions for use are in the User's Guide.

[. . . ] cleaning the car), connect it to the electricity supply via a residual current device (RCD), with a rated residual operating current not exceeding 30mA. 8 Keep an eye on the cable, so it doesn't catch on anything, or trip anyone. 9 If you're using the cleaner on stairs, sit it where it can't topple, and keep it below you, so if it does topple, it won't land on you. 11 Unplug the cleaner and rewind the cable when not in use, before moving and before cleaning. [. . . ] 18 There's also a suction control on the nozzle ­ move it towards the nozzle for maximum suction, move it away from the nozzle to reduce suction. plug in caution If you've accidentally pressed the on/off switch, the cleaner will come on when you plug it in. 19 Plug the cable into a power socket near the area to be cleaned (switch the socket on, if it's switchable). 20 Press and release the on/off switch 3, to turn the cleaner on. switching on cleaning 21 Move the tool over the surface, cleaning a small area at a time. 22 When you move to a new area, overlap the previous area, to make sure none of the surface is missed. switching off 23 If you've finished, if you want to change tools, or if you just want to stop, press and release the on/off switch 3, to turn the cleaner off. If it catches on anything, stop pressing, and it'll stop rewinding. 28 We've tried not to make it too powerful, to avoid wrecking your home, so you may need to push the plug end into the storage area manually. finished cleaning? removing and emptying the bin 29 You don't have to empty the bin after each use, but it's a very good idea. The cleaner will happily work till it's chock full, but you'll be wasting energy swirling yesterday's dust around. 30 Switch off, unplug, and leave it for a minute, to let the dust settle. 31 Squeeze the locks on the hose end, and pull the hose out of the bin. 4 32 Press the bin release button, and hold it down. 34 When the bin is clear of the cleaner, you may let the bin release button go. 35 Lower the bin into your dustbin so the bottom of the bin is below the rim ­ this'll prevent the dust dispersing into your environment. 36 Press the latch, to open the bottom of the bin, and dump its contents into the dustbin. 37 Turn the agitator on top of the bin twice clockwise, then twice anti-clockwise. 38 This agitates the inside of the HEPA filter, releasing any dust that might be held in its folds 39 Lift the bottom of the bin up to close it. check the filters 40 While emptying the bin, check the filters ­ blocked filters quickly reduce suction. 42 If either filter looks clogged or dirty, or if you can't see the HEPA filter clearly, it's time to clean both filters ­ jump to point 53 below. 43 If they don't need cleaning, replace the bin in the cleaner ­ put the bottom in first, then push the top home. 45 Push the hose end into the inlet above the bin handle. cleaning the cleaner 46 Switch the cleaner off and unplug it before cleaning. A dab of washing-up liquid will remove stubborn stains, but clean it off afterwards, or it may stain. 50 Wipe the tools with a damp cloth, or hand wash in warm soapy water. Remove all trace of the washing-up liquid, and check they're dry before refitting. [. . . ] 73 Push the hose end into the inlet above the bin handle. check the outlet filter 74 Turn the cleaner round and check the outlet filter. 75 Press the lock down, pull the top of the cover away from the cleaner, and lift the cover up and off the cleaner. 77 If the filter looks a bit mucky, tap it over the newspaper, to dislodge the dirt. 78 If its very dirty, soak it in warm soapy water, swill it out under a running tap, to remove all trace of soap, then let it air dry, till it's completely dry. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE RUSSELL HOBBS 14835




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual RUSSELL HOBBS 14835 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.