User manual RUSSELL HOBBS 14899

[. . . ] 15 Keep the coffee maker and the cable away from hotplates, hobs or burners. 16 Don't use accessories or attachments other than those we supply. 17 Don't use the coffee maker for any purpose other than those described in these instructions. 18 Don't use the coffee maker if it's damaged or malfunctions. [. . . ] 35 If you're making less than 6 cups of coffee, press the 2-4 button, to turn the brew strength feature on. 36 The brew strength feature will only work if the number of cups is set to 2 or 4. 37 Press the Y button if you're using coffee beans, press the / button if you're using ground coffee. 4 switching off 43 The coffee maker does not switch itself off ­ you must do this manually. 44 Press the Y button if you're using beans, press the / button if you're using ground coffee. 46 Unplug, and let the coffee maker and carafe cool down fully before cleaning, or for about 10 minutes before refilling. caution Don't lift the reservoir lid till the coffee maker has cooled ­ escaping steam may create a scald hazard. a quick cup 47 If you want a quick cup of coffee before the brewing cycle has finished: 48 You may remove the carafe at any time. 49 To prevent the filter holder overflowing, replace the carafe on the hotplate within about 20 seconds. This may not sound much, but you'll find it's more than enough time to pour a couple of cups of coffee. 50 Replacing the carafe on the hotplate opens the non-drip valve, to let the coffee flow again. brew strength 2-4 51 Use this feature if you're brewing less than 6 cups of coffee. It slows the brewing process, so your coffee will have the same strength as coffee from a full carafe. 52 The brew strength feature will only work if the number of cups is set to 2 or 4. 53 Press the 2-4 button to activate the brew strength feature, the 2-4 icon will show up on the display. coffee later 54 Set the clock to the correct time: a) Press and release the h button until the correct hour is shown. b) Press and release the min button until the correct minute is shown. Either go right round (24 hours or 60 minutes), or unplug the coffee maker, to reset the display to 12:00. e) The clock will retain its settings until the coffee maker is unplugged. e) Press and release the min button until the correct minute is shown. f) Use the e f g button to select the coffee strength e = light, f = medium, g = dark. g) If you're using coffee beans, use the 2-10 button to set the number of cups you want. h) If you're making less than 6 cups of coffee, press the 2-4 button, to turn the brew strength feature on. i) The brew strength feature will only work if the number of cups is set to 2 or 4. j) If you're using ground coffee, press and release the / button, otherwise the machine will assume you're using beans. [. . . ] In areas of very hard water it may be necessary to descale as often as once a month, or to use filtered water instead of ordinary tap water. 13 Use a proprietary brand of descaler suitable for use in plastic-bodied products. When descaling has finished, empty the carafe and operate the coffee maker twice more with fresh water, but without coffee. Discard the water to ensure that no chemical residues are left in the coffee maker. [. . . ]