Detailed instructions for use are in the User's Guide.
[. . . ] Remove all packaging, but keep it till you know the mini-chopper works.
important safeguards
Follow basic safety precautions, including: 1 The mini-chopper must only be used by or under the direct supervision of a responsible adult. 2 Don't put the motor unit in liquid, don't use it in a bathroom, near a source of water, or outdoors. Take care when you're handling and cleaning the blade unit if you can't see what you're doing, don't do it. [. . . ] 20 If the cable is damaged, return the mini-chopper, to avoid hazard.
household use only before using for the first time
Dismantle the mini-chopper, and clean the bowl, guard, lid, and blade unit, to remove any manufacturing residues or dust.
processing
1 Unplug the mini-chopper. 3 Squeeze the grips on the sides of the guard gently together, and lift the guard out of the bowl. 4 Put the food to be processed in the bowl: a) don't fill above max b) don't fill with liquids it may overheat (or overflow) c) don't chop hot food, ice, or raw meat d) don't process large amounts in batches if you need to process large amounts, you need a full size processor e) don't process big bits maximum 12mm cubes 5 Align the slots in the guard with the supports round the edge of the bowl, and fit the guard to the bowl. 12 Process in bursts of a few seconds at a time, and inspect the results between bursts.
done?
13 Lift the motor unit off the bowl. 14 Squeeze the grips on the sides of the guard gently together, and lift the guard out of the bowl. 17 Alternatively, hold the plastic part of the blade unit, and lift it straight up and out of the bowl. 18 Fit the dispensing lid to the bowl it has two sets of holes, for sprinkling and dusting
a couple of tips
care and maintenance
· Cut your ingredients into small pieces before processing. · Chocolate, nuts, and cheese will chop better if chilled.
1 Unplug the mini-chopper before dismantling or cleaning. 3 Squeeze the grips on the sides of the guard gently together, and lift the guard out of the bowl. 4 Hold the plastic part of the blade unit, and lift it straight up and out of the bowl. 5 Take care cleaning the blade unit if you can't see what you're doing, don't do it. 13 Don't put any of the parts in a dishwasher.
reassembly
14 Hold the plastic part of the blade unit, and lower it over the spindle. 15 Align the slots in the guard with the supports round the edge of the bowl, and fit the guard to the bowl. 16 Lower the motor unit on to the guard.
connection
This product doesn't need an earth. Don't use a non-rewireable plug unless the fuse cover is in place. If you remove the plug, dispose of it.
a few simple recipes to get you started coriander pesto
2 handfuls fresh leaf coriander 2 cloves fresh garlic 60g pine nuts 60g freshly grated Parmesan 100-125ml olive oil freshly ground black pepper Process the coriander, garlic, pine nuts and oil together. [. . . ] If under guarantee, say where and when purchased, and include proof of purchase (till receipt). Customer Service Customer Returns (correspondence only) Salton Europe Ltd Salton Europe Ltd Heath Mill Road Failsworth Wombourne Manchester Wolverhampton M35 0HS WV5 8AQ Customer Service (service@saltoneurope. com) telephone 0845 658 9700 (local rate number)
guarantee
Defects affecting product functionality appearing within one year of purchase will be corrected by replacement or repair provided the product is used and maintained in accordance with the instructions. Documentation, packaging, and product specifications may change without notice.
online
439-808 www. russellhobbs. co. uk for more products.
8 [. . . ]