User manual RUSSOUND DPA-1.2
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual RUSSOUND DPA-1.2. We hope that this RUSSOUND DPA-1.2 user guide will be useful to you.
Manual abstract: user guide RUSSOUND DPA-1.2
Detailed instructions for use are in the User's Guide.
[. . . ] Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer. Quick stops, excessive force and uneven surfaces may cause the appliance and cart combination to overturn. Wall or ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer. Ventilation - The appliance should be situated so that its location or position does not interfere with its proper ventilation. [. . . ] Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. Avoid using a telephone (other than cordless type) during an electrical storm. Do not use the telephone to report a gas leak near the leak.
Precautions 1. Do not handle the DPA-1. 2 or power cord when your hands are wet or damp. If water or any other liquid enters the DPA-1. 2 cabinet, take the DPA-1. 2 to qualified service personal for inspection. Location of the DPA-1. 2 - Do not expose the DPA-1. 2 to direct sun light or heating units as the DPA-1. 2 internal components temperature may rise and shorten the life of the components. Care From time to time you should wipe off the front and side panels and the cabinet with a soft cloth. Do not use rough material, thinners, alcohol or other chemical solvents or cloths since this may damage the finish or remove the panel lettering.
Conforms to UL 6500 Certified to CSA C22. 2 Nol-94
Russound
DPA-1. 2
Tested to Comply with FCC Standards
FOR HOME OR OFFICE USE
Contents 1. INTRODUCTION Congratulations on your recent purchase of the Russound DPA-1. 2 two-channel amplifier. The DPA-1. 2 is a high-current, high-quality amplifier, which includes automatic A/B switching. The DPA-1. 2 two-channel amplifier will amplify a source at the sensing line input or the sensing speaker level input. Switching between a default audio source and a local source, the DPA-1. 2 is ideally suited for those applications that require automatic switching and amplification. The DPA-1. 2 power output per channel is 35 watts per channel into 8-Ohms, and 45 watts into 6-Ohms. Each amplifier output channel incorporates thermal, and short circuit protection and Russound's unique Dynamic Clipping Sensor that allows for better headroom and volume without clipping or distortion. POSSIBLE SYSTEM CONFIGURATIONS The DPA-1. 2 can be used as a single-source two-channel zone amplifier, or as a local-source amplifier that automatically switches between a default source (such as a whole-house audio distribution system) and a local source (such as a television set).
4
LINE OUTPUTS VIDEO LEFT AMPLIFIED OUTPUT TO ROOM SPEAKERS RIGHT
STEREO
BRGD * MONO
LINE INPUT
SENSING
L
GAIN
R
12V TRIG INPUT
VIDEO INPUT
SENSING
DELAY
5 4 3 1 2
L
12V TRIG OUT 100mA
R SPEAKER A OUT
SENSING
WARNING : SHOCK HAZARD DO NOT OPEN AVIS : RISQUE DE CHOC ELECTRIQUE NES PAS OUVRIR.
AMPLIFIED INPUT
* FOR BRIDGED OPERATION SEE MANUAL
AC 120V 60Hz 1. 5A~
SPEAKER B OUT
AMPLIFIED INPUT
DEFAULT
AMPLIFIED INPUT FROM AUDIO DISTRIBUTION SYSTEM
5
4. BACK PANEL CONNECTIONS LINE INPUT SENSING Line Input: This line input is a sensing input that will activate the DPA-1. 2 L when an audio signal is present. When there is no audio, the amplifier will go into standby or default back to the R whole-house amplified signal if playing. Speaker Level Input: The speaker level input is a sensing input that will automatically switch the DPA1. 2 from the default input to the speaker level input. An amplified signal from a smaller amplifier or television can be amplified by the DPA-1. 2 for a cleaner, more dynamic sound. [. . . ] Delay Time: The delay timecan be adjusted from about DELAY 5 1 0. 3 minutes to 8 minutes. The DPA-1. 2 amplifier will 2 automatically switch to the default input signal after the 4 3 delay setting. When the audio or video source is no longer playing, the DPA-1. 2 will switch back to the default input after the set delay time. Power: The DPA-1. 2 is set at the factory AC 120V for operation of either 120 VAC 60Hz or 60Hz 2A~ 230 VAC 50Hz. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE RUSSOUND DPA-1.2
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual RUSSOUND DPA-1.2 will begin.