User manual RUSSOUND HTP-1
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual RUSSOUND HTP-1. We hope that this RUSSOUND HTP-1 user guide will be useful to you.
Manual abstract: user guide RUSSOUND HTP-1
Detailed instructions for use are in the User's Guide.
[. . . ] Model HTP-1
HOME THEATER PLATE Double Gang Multi-Connection Plate
Instruction Sheet
DESCRIPTION
The Home Theater Plate (HTP-1) is a double-gang in-wall connection plate designed to allow easy hookup of all the speakers in a 5. 1- or 6. 1-channel surround sound system. It includes terminals for five pair of satellite speakers, two powered/active (low level) subwoofers and one rear surround speaker. The heavy-duty molded plate supports the weight of high-quality wires, and each connection is clearly labeled. [. . . ] When inserting any wires or connectors, be sure that they don't bridge over to another terminal or wire, causing a short circuit. Typically one conductor is marked in some way, either with printing on the outer jacket, different color wire conductors, a formed ridge on the outer jacket or a thread running within one of the conductors. It is very important to maintain proper phasing by hooking the positive leads to the positive terminals and negative leads to negative terminals on every component. If one speaker is wired backwards there will typically be a lack of bass response and the sound may appear to wander between the speakers rather than be precisely placed. Use a 7/16" (11mm) socket to tighten the hex heads of the binding posts. Make them snug, without overtightening and damaging the terminals or the plate. Re-tighten the connections within 24 hours of making the original connections to ensure long-term reliability. Pin connector - Loosen the hex head, insert the pin into the side hole on the binding post, then tighten the hex head. Insert the spade so that it hugs the binding post, then tighten the hex head. Banana plug connector - Make sure the hex head is tight on the binding post. Insert the banana plug as far as it will go into the top hole of the binding post. Bare or tinned wire - Strip the speaker wires, exposing approximately 1/2 inch (14mm) of wire. Individually twist each conductor to keep the strands of wire bundled together. Loosen hex head, insert wire into the side hole of the binding post, then tighten the hex head. RCA connector - The RCA connectors for powered/active subwoofers utilize "F" type connectors on the back of the plate for increased reliability. Be sure the left and right channels remain consistent throughout the wiring process.
LIMITED WARRANTY
The Russound HTP-1 is fully guaranteed for ten (10) years from the date of purchase against all defects in materials and workmanship. [. . . ] Write the RA number on the shipping label and ship to: Russound, ATTN: Service, 5 Forbes Road, Newmarket NH 03857 Russound sells product only through authorized Dealers and Distributors to ensure that customers obtain proper support and service. Any Russound product purchased from an unauthorized dealer or other source, including retailers, mail order sellers and online sellers will not be honored or serviced under existing Russound warranty policy. Any sale of products by an unauthorized source or other manner not authorized by Russound shall void the warranty on the applicable product.
Rev. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE RUSSOUND HTP-1
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual RUSSOUND HTP-1 will begin.