User manual SAGEM DTR94 HD DATASHEET

[. . . ] FREESAT+ HD DIGITAL TV RECORDER DTR94 HD Freesat USER MANUAL ENGLISH CONGRATULATIONS! This Recorder is a new generation of Sagem Communications SAS (here after referred to as Sagem Communications) recorder dedicated to Digital Satellite Television and equipped with a hard disk. With this technological advantage, you can make digital audio/video recordings. Once you have connected your recorder and performed the initial installation, you will be able to watch and enjoy freesat HD and SD channels. You can update your recorder if new functions or services become available. [. . . ] Programmes providing this service will be broadcast in the selected audio preferred language if available. - 15 - 6-2-2 Hiding Adult channels In USER SETTINGS, select ADULT GENRE. If you activate this function, all adult genre channels will be hidden : you will not be able to switch to an adult genre channel, or browse this category in the electronic programme guide. Use this feature to protect your children from this type of exposure. 6-2-3 Recorder locking In the USER SETTING menu, select INSTALLATION LOCK. If you activate the installation lock, you will need to enter the parental code every time you want to access the recorder menus (Recorder settings, Channels, etc. ). 6-2-4 Changing your Parental code In USER SETTINGS, select CHANGE PARENTAL CODE. The parental code is initially defined during the first installation, and is used to lock the installation (access to recorder settings). To change your parental code, enter the current fourdigit code using the remote control. Then enter your new parental code and confirm it (0000 is not accepted). - 16 - 6-2-5 Recording preferences In USER SETTINGS, select RECORDINGS. Timers margin for EPG: You can programme recording margins which will be automatically added to the recordings carried out via the electronic programme guide. You can thus set the recorder so that it starts to record a programme before its announced start time, and stops after its announced end time. To activate this feature, just select the desired starting and ending times (5, 10 or 15 minutes). Skip: By default; the and keys are set to skip 1 minute backward and forward when pressed during a video playback. You can change this setting to your convenience, and independently decrease or increase each action. 6-3 MANAGING CHANNELS AND FAVOURITE LISTS To access the channels settings screen, press . Once you are in the main menu, select CHANNELS. 6-3-1 Managing Channels In CHANNELS, select MANAGE CHANNELS. By default, all TV channels and radio stations found during the recorder installation are saved and available. You can however hide the unwanted channels, or lock access to specific channels. Each time you switch to a locked channel, you will be asked to enter your parental code. To hide / unhide a channel, highlight it and press the red key on the remote control. To lock / unlock access to a channel, highlight it and press the green key. Locked channels appear with a 'key' symbol. - 17 - 6-3-2 Creating Favourite lists In CHANNELS, select FAVOURITE LISTS. To create a favourite list, press the yellow key to select an empty list (list A to D). Highlight a channel in the Main channels list and press the green key to add it into your favourite list. To save your favourite list, press . To edit or empty a list of favourite channels, use the yellow key to select it and carry out the desired modifications. 6-4 RECORDER SETTINGS To access the recorder settings screen, press SETTINGS. [. . . ] Check that the recorder is connected to a HOME CINEMA amplifier with a digital link (see "Connection to a home cinema amplifier", page 12). Check that the signal type chosen for AUX Scart output is compatible with your VCR (select PAL on VCR, see "Audio and Video Output settings", page 20). I cannot channel-surf between all my channels In the case of a double simultaneous recording, you can only channel-surf between a restricted number of channels. will be able to channel-surf between all your channels again when at least one of the recordings ends. The message The recorder is set to record using the IN 2 satellite input "Recording failed" appears when I press the signal. "Connection to the satellite dish", page 8). - 36 - A black screen (no video) appears at the end of a Some channels stop their broadcast with a fixed image or no recording. [. . . ]