User manual SAGEM I-JET VOICE

[. . . ] Overview Dear customer, The fax machine you have purchased prints on plain paper by means of an ink cartridge. It also enables you to use additional devices, such as cordless phones. Your fax machine is also equipped with features that help you install and use it. Quick and easy installation EASY INSTALL will guide you through the installation of your fax machine. Using this sheet together with the display prompts will aid the installation of your machine. [. . . ] 6 It is possible that the answering machine not only counts the messages received, but also the number of fax calls. 7 Please ensure that the code for starting the fax reception from other telephones (factory setting * and 5) is not the same as for remote access to recorded messages. Where necessary the code for function 34 may be changed (see subheading EASYLINK). 8 If your answering machine accepts the call but your fax machine does not stop ringing, try and install your answering machine by serial connection, for example by connecting it to the same telephone socket or to the EXT. TEL. socket of your fax machine (see chapter Installation / Connection of additional devices). 9 If your answering machine cannot accept calls, your fax machine will automatically start to receive faxes after the no. 10If your external answering machine records fax signals, but your fax machine cannot receive any faxes, check the connection of your external answering machine. Connect the external answering machine to the same telephone socket or to the EXT. TEL. socket of your fax machine (see chapter Installation / Connection of additional devices). External answering machine Connect the answering machine as described in chapter Installation / Connecting additional devices. To provide for the optimum performance of an external answering machine, set this device to ring once or twice. To avoid the automatic acceptance of calls by the fax-switch, you must set FAX RINGS: and TOTAL RINGS: to a value at least two ringing signals higher than the setting of the external answering machine. If you switch off the external answering machine, calls are accepted by the fax-switch (see sub-heading Setting the operating mode SM /without built-in answering machine) Setting example: ANSWERING MACHINE RINGS 2 4 4 TOTAL RINGS: FAX RINGS: 18 5 Telephone Das Telefon If you enter a wrong digit, delete it by using CLEAR. The R key allows you to use various services offered by the telephone service provider (call waiting, toggling calls, etc. ). If you have not connected your fax machine to the mains, it will not function at all - even for making telephone calls. Using short dial 1 Press n and choose a number between 0 and 9. In case you want to send a fax message, press START. Correcting entries Making a call 1 Dial the desired number. As soon as the other party answers, lift the handset and speak. 1 Press n and select an entry by using the number keys between 0 and 9. The stored name or number appears on the display. 4 Enter desired character and confirm with OK. Redial With PP you can redial the last five numbers you have dialled previously. 3 Lift the handset or press DIAL/z. Deleting entries 1 Press n and then a key between 0 and 9. 3 Press OK to confirm the deletion of the entry. Delete stored numbers With CLEAR you can delete the numbers you do not need anymore from the redial memory. 2 Choose with u whether to delete only the last number displayed or all five numbers. 3 Press OK to execute the cancel command. Telephone book a The telephone book function on your fax machine has a capacity for about 200 numbers and names. You can also store numbers during a telephone conversation. Storing numbers 1 Press a for two seconds. [. . . ] 35 W 220-240 V / 50-60 Hz up to 25 minutes yes* temperature: relative humidity: not condensing temperature: relative humidity: 5 - 40 °C 15 - 85 % RH Glossary additional device, additional telephone: You can operate your fax machine together with additional devices such as (cordless) telephones, an answering machine etc. calling line identification: When you receive a telephone call, the number of the calling party will be shown on the display (not supported by all network providers). memory: Messages of the built-in answering machine as well as fax messages that had not been printed will be stored in this memory . With this signal you can start fax reception from an additional telephone which has tone dialling. [. . . ]