User manual SAGEM MY411C

[. . . ] ENGLISH You have just purchased a SAGEM phone, we congratulate you; it is recommended that you read this handbook carefully in order to use your phone efficiently and in the best conditions. Your phone can be used internationally in the various networks (GSM 900 MHz and DCS 1800 MHz or PCS 1900 MHz) depending on the roaming arrangements with your operator. This phone is approved to meet European standards. SAGEM is a trademark of Sagem Mobiles, SAFRAN group. JavaTM and all JavaTM based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. [. . . ] This mode lets you detect other devices and pair with them from your phone. During this period, it can be detected by the other Bluetooth® devices. Select this mode when a pairing with your phone has been initiated from another Bluetooth® device. - On & always: your phone is visible and can be detected by the other Bluetooth® devices as long as this mode is selected. IMPORTANT: - The Off option ensures the best battery life for your phone. - Bluetooth® security is better guarded because your phone remains invisible to the other devices. My Bluetooth® name This is the name used to identify your phone when it is detected by another Bluetooth® device. If the Bluetooth® function is not active, the phone prompts you to activate it using one of the 3 modes described above. The phone searches for visible Bluetooth® devices and displays the list. Your phone then prompts you to enter a code which must be the same as the code entered on the remote device. Enter and validate this code: Your phone is now paired with the remote device. A connected device is shown in blue in the list. Settings 41 [Options] on the name of a device lets you access the following options: - Delete: this is used to delete the device. - Deactivate: this is used to deactivate the connection with the device. - Properties: this is used to display the list of the device's Bluetooth® services. Notes: - Refer to the user manual of the device with which you are pairing to find out how to set this device to the mode allowing this operation. - The code of the remote device may be predefined by the device manufacturer. In this case, refer to the user manual of this device to find out this code. Car kit/Headset This menu allows you to activate or deactivate the Automatic response option when the phone is connected to a pedestrian kit or a car kit. SyncML Two selections: - Network (OTA): you can synchronize your phonebook, your organizer or your ToDos with your archives stored in your operator's network depending on the options offered by your operator with a GSM or GPRS connection from your phone. - Local: you can synchronize your phonebook, your organizer or your ToDos with your archives stored in your computer. Use the Wellphone software and configure your USB connection in your phone or activate Bluetooth®. USB Mode This menu allows you to select a mode to connect the phone to a PC with a USB cable available as an accessory. At plugging-in If you select this option, when connecting a USB cable, the phone asks you to select the mode you want. It allows you to exchange data (visit cards, contacts) between the phone and a PC. After connection of the USB cable between the phone and the PC, you must use the MPAS software (My Pictures And Sounds available on www. planetsagem. com) or the Wellphone software (available on www. wellphone. com). [. . . ] After 5 or 10 failed attempts (depending on the type of SIM card), the SIM card is definitely locked. SIM LOCKED In certain cases, the handset can only be used with some types of SIM cards. This message means that the SIM card you are using does not fit with the phone. If the message SIM not present appears on the screen, you will need to check its compatibility next to the place where you bought it. [. . . ]