User manual SAMSUNG XPRESS M2625D

[. . . ] Introduction Key benefits Features by models Useful to know About this user’s guide Safety information Machine overview Control panel overview Turning on the machine Installing the driver locally Reinstalling the driver 4 6 8 9 10 15 17 19 20 22 Available maintenance parts Storing the toner cartridge Redistributing toner Replacing the toner cartridge Replacing the imaging unit Cleaning the machine Tips for moving & storing your machine 4. Troubleshooting Tips for avoiding paper jams Clearing paper jams Understanding the LED 59 60 68 2. Introduction This chapter provides information you need to know before using the machine. € Key benefits • Features by models • Useful to know • About this user’s guide • Safety information • Machine overview • Control panel overview • Turning on the machine • Installing the driver locally • Reinstalling the driver 4 6 8 9 10 15 17 19 20 22 Key benefits Environmentally friendly - M282x Series ▪ For single-side printing, 28 ppm (A4) or 29 ppm (Letter). [. . . ] Using a network-connected machine 128 Wireless network setup Ad hoc via USB cable If below screen appears, press the within 2 minutes. (WPS) button from the control panel If you do not have an access point (AP), you may still connect the machine wirelessly to your computer by setting up an ad-hoc wireless network by following the simple steps below. Items to prepare • • • • Network-connected computer Software CD that was provided with your machine A machine installed with a wireless network interface USB cable 6 7 8 9 When the wireless network set up is completed, click Next. After selecting the components, you can also change the printer driver name, set the machine to be shared on the network, set the machine as the default machine. Using a network-connected machine 129 Wireless network setup Creating the ad hoc network in Windows 1 2 Turn on your computer and the wireless network machine. If the installation window does not appear, click Start > All programs > Accessories > Run. Exe replacing “X” with the letter, which represents your CDROM drive and click OK. € For Windows 8, If the installation window does not appear, from Charms, select Search > Apps and search for Run. Exe, replacing “X” with the letter that represents your CD-ROM drive and click OK. 4 5 Select Configure the wireless network connection using USB cable on the Printer Connection Type screen. After searching the wireless networks, a list of wireless networks your machine has searched appears. € Enter the wireless Network Name: Enter the SSID name you want (SSID is case-sensitive). Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Using a network-connected machine 130 Wireless network setup • Encryption: Select the encryption (None, WEP64, WEP128). € WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index. The wireless network security window appears when the ad hoc network has security enabled. select Open System or Shared Key for the authentication and click Next. € WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key. Before entering the IP address for the machine, you must know the computer’s network configuration information. If the computer’s network configuration is set to DHCP, the wireless network setting should also be DHCP. Likewise, if the computer’s network configuration is set to Static, the wireless network setting should also be Static. [. . . ] Toner is a powder used in laser printers and photocopiers, which forms the text and images on the printed paper. Toner can be fused by by a combination of heat/pressure from the fuser, causing it to bind to the fibers in the paper. glossary 226 Glossary TWAIN An industry standard for scanners and software. By using a TWAIN-compliant scanner with a TWAIN-compliant program, a scan can be initiated from within the program. [. . . ]