User manual SANGEAN ATS-909

[. . . ] When connected the batteries within the radio will be automatically disconnected. SETTING THE CLOCK(REAL TIME) In keeping with wold wide short wave protocol time is programmed on a 24 hour basis. The clock display will start to run as soon as batteries are inserted. Press button (4) (Time Set). Display time digit will be blank and Home display will flash. [. . . ] MEMORY TUNING It is possible to preset up to 306 stations using memory capability of the A TS-909. The SW band is capable of storing 29 pages or 261 preset stations (29 Pages x 9 Presets/Page): 18 Presets on FM and MW (2 Pages 9 Presets)and 9 presets on LW. To Manually Set Memory on FM/MW/LW Bands: Tune to station you would like to program into memory. Press memo button (16) [M], MEMO will flash in LCD display, select page desired by pressing PAGE button[11]. Display will flash and next available position on display will flash if an available. If memory is memory is full no suggested position will flash and LCD will display MEMOFULL when any button is depressed. Press ( ) button to assign new frequency to available flashing open position, If selected button is held for more then 2 seconds, even with MEMOFULL flashing, newly selected station will replace existing station. To Manually Set Memory on SW Bands: Tune to station you would like to program into memory. Display will flash and next available position on display will flash if an available position is available. If memory is full no suggested position will flash and LCD will display MEMOFULL when any button is depressed. If selected button is held for more then 2 seconds, even with MEMOFULL flashing , newly selected station will replace existing station. You may change or initiate any page name at any time by first selecting the page and then pressing the edit button (12)[EDIT] and using the Rotary Knob(31) to place an alphanumeric character in the name 8 Space in the LCD Display. Once a character is selected you may move to the next position to place another character by using the UP/DOWN button (10). When name is completely entered press ( ) button. RECALLING A STATION IN MEMORY On LW, press ATS/LW button (23), then press any of the numbered buttons on the key pad. On MW/FM, press A TS/MW button (22) [MW] or press A TS/FM button (24), select desired page by pressing page button(11)[PAGE] and then press any of the numbered on the key pad. On SW, press SW button (21) [SW], select desired page by pressing page button (11)[PAGE] and UP/DOWN button (10)until desired page is selected and then push ENTER button (17) . The receiver will then automatically search for the strongest frequency on that page. You may change the selected frequency using the numbered keys on the pad. CANCELING A STATION IN MEMORY Recall the station in memory, press the memo button (16) [M] and then press the cancel button (18) [C]. LOCKING A STATION INTO MEMORY After programming your stations into memory you may lock any station into memrory to prevent accidental erasure or elimination should the A feature be turned on again. TS To lock a station recall the station you wish locked and press MEMO button (16) [M] and then lock button (9) [ ]. The display will show memo locked symbol whenever that station is selected. To remove station from locked position repeat above procedure and locked symbol will be removed and station will no longer be in locked state. [. . . ] 11 ANT-60 PORTABLE SW ANTENNA Included with the A TS-909 is the Sangean ANT-60 Portable SW Antenna. For maximum performance this antenna should be placed as high as possible above the ground and in an unobstructed area if possible. MW STEP (36) This switch should be set for 10 kHz when listening to radio stations in the United States and Canada. In many countries overseas it may be necessary to switch to 9kHz to receive local broadcasting stations at the correct frequency. [. . . ]