User manual SANGEAN DT-200V

[. . . ] LOCATION OF CONTROLS Congratulations and welcome to The SANGEAN WORLD OF LISTENING! To insure proper operation please famililarize Yourself with these instructions before using your New receiver 1 . Belt Clip 2 3 2 1 4 11 9 10 5 6 7 8 13 3 14 12 4 BATTERY INSTALLATION The battery cover is located on the back of the unit. [. . . ] 6 TUNING THE RADIO BAND FREQUENCY ANTENNA AM 520-1710KHZ Internal/Rotate radio for best reception FM 87. 5-108MHZ External/Make sure Headphones are inserted into Headphone Jack ch. 2-13(VHF) External/Make sure Headphones are inserted into Headphone Jack TV A SCAN TUNNING Turn on the Radion by pressing On/Off Button (1). Select AM, FM or TV Band by pressing Band Selection Button(7) and then press and Hold the Tuning Control(5) or(6) for more than 1/2 second. The Radio will Scan all the frequencies in that Band and will stop automatically for 3-4 seconds each time it lands on an active station. Push the Tuning Control again and the Radio will stay at the Station you have selected. The Radio will turn tself off automatically after 60 minutes of Operation or you may turn it of at anytime by Pressing the On/Off Button. 7 B MANUAL TUNING Turn on the Radio by pressing On/Off Button (1). Select AM, FM or TV Band by pressing Band Selection Button (7). Desired station May be selected by either pressing the Tuning Control(5)or(6) intermittently until the desired Station is reached or pressing and holding the Tuning Control until the desired station is Reached. Release and push the Tuning Control once again to retain the desired Station. C MEMORY TUNING(STAION PRESET) Turn on the Ridio by pressing On/Off Button (1). Select AM or FM Band by pressing Band Selection Button (7). Tune to the desired staTion using the Manual or Scan Tuning Methods As reached and indicated in the desired station Is reached and indicated in the LCD Display (4) Press the Memory Button (9). A M will flash in the LCD Display. During its flashing push the Select Button (10). The Number of the Memory position will appear successively each time the Select Button is pressed. Select the Number Position for the station appearing in the LCD Display by pressing the Menory Button (9) when the correct position appears 8 In the LCD Display. You may store a total of 19 stations in any mix from any band. Original stations are eliminated when new stations are selected to take their places. D MEMORY TUNING (STATION RECALL) Turn on the Radio by pressing On/Off Button (1). Pressing and Holding the Select Button (10) for more than 1/2 second will begin displaying the stored station and their associated numbers one by one in the LCD Display . Numbers order of display may be changed form ascending to descending and vice versa at any time by pressing the Tuning Controls (5) or (6) . It is only necessary to press the Select Button a second time when the desired station appears in the LCD Display to retain the desired station MONO/STEREO BUTTON Monaural or Stereo reception may be selected Through the Headphones during FM reception by Alternately pressing the Mono/Stereo Button (8). 9 LOCK SWITCH To prevent accidental changing of any o the radio settings move the Lock Switch (13)to its up , locked position( ). [. . . ] Always remove old or weak batteries as they can leak and destroy electronic components and circuitry. 7. Modifying or tampering with the radio 's internal components can cause a malfunction, and will void the product's warranty. WARRANTY Please see the Statement of Limited Warranty enclosed with your Sangean Product for complete details. [. . . ]