User manual SANGEAN DT-200X

[. . . ] Warranty is only valid in the United States of America, Canada, and Mexico and is not transferable to owners subsequent to the original owner. This warranty does not cover intentional or accidentally damaged product, or items used in ways other than the item was intended to be, units repaired or altered by persons other than Sangean America, Inc. , or damage caused by parts, accessories, or batteries not supplied or approved for use by Sangean America, Inc. 1 Any applicable implied warranties, including the warranty of merchantability, are limited in duration to a period of 90 (Ninety) days from the date of original purchase. No other warranties, whether expressed or implied shall apply to this product thereafter. [. . . ] · In Mono: Set selector to MO. 6 LCD Display Memory Button/Clock Set Band Selection Manual Tuning 7 8 9 6 7 10 My Favorites Lock Switch The lock switch prevents accidental changing of any of the radio settings. · To enable the lock function slide the lock button located on the right side of the unit to the up position. When lock is activated there will be this symbol located on the top of the display. · To disable the lock function, slide the switch to the down position. 11 12 Belt Clip A removable belt clip is provided on the back of the unit. Removal: It can be removed by gently pushing on the center tab of the clip where indicated, and sliding the clip downward towards the bottom of the radio. Replacement: You can easily connect the belt clip by inserting the top of the clip into the designated receiver slots and gently pushing the clip in an upwards motion towards the top of the radio. 13 Battery Compartment 8 Battery Installation NOTE: A flashing "E" appearing on the LCD display indicates a weak battery and that replacement of batteries is required. · Prepare replacement batteries to ensure a quick and easy change. Failure to change batteries within 1 minute will reset presets and clock settings. Apply a gentle downward pressure and slide the door to the right side of the unit. · Place 2 `AA' batteries inside the unit oriented to the illustration located just below the battery compartment. Tuning the Radio Seek Tuning · Turn radio on using the On/Off button located on the top of the radio. · Select desired band by pressing the "Band" selector on the front of the unit. · Press and hold the proper tuning button (Up/Down) for approximately ½ second. · Repeat as many times as desired. 9 Manual Step Tuning · Turn radio on using the On/Off button located on the top of the radio. · Select desired band by pressing the "Band" selector on the front of the unit. · Press the desired tuning button (Up/Down) repeatedly until desired frequency is found. See Setting Memory Section for instructions on how to program stations into radio memory. · Turn radio on using the On/Off button located on the top of the radio. · Press "My Favorites" button located on the right side of the radio. [. . . ] · Select hour by using the Tuning Control Buttons located just to the right of the display. Using the Tuning Control Buttons located just to the right of the display. · Once time displayed matches desired setting press MEMO or CLOCK button once more. [. . . ]