User manual SANGEAN HDT-1X

[. . . ] When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 2 20070425_HDT-1&HDT-1X_381R20S-A. p655 2007/4/30, ¤U¤È 01:43 Main Unit Controls (Front & Remote Control) Unit Button 1 2 Remote Button A C Action/Combination Turns unit on/off 10 Digit Keypad FREQ Preset Clock Set Remote Sensor LCD Display Tuning Advanced Menu Options Seek Tuning HD Seek Tuning BAND INFO 2 sec. hold FREQ PRESET Standby LED Indicator Function Programs Memory Presets Allows Direct Entry of Channel Frequency Allows recall of memory presets Allows Direct Time Entry for Clock 3 4 5 6 7 8 9 10 11 12 N/A N/A G H I D B E F N/A Step Tunes Up/Down Activates/Deactivates Settings Seeks to next detectable frequency Seeks to next detectable HD Radio Broadcast Signal Selects AM/FM Bands Toggles through Display Modes Provides Access to Advanced Menu Options Prepares Tuner for Direct Frequency Entry Using #2, Remote Keys "C" Prepares Tuner to Recall Memory Presets Using #2, Remote Keys "C" Indicates if Unit is On or Off 3 20070425_HDT-1&HDT-1X_381R20S-A. p656 2007/4/30, ¤U¤È 01:43 4 20070425_HDT-1&HDT-1X_381R20S-A. p657 2007/4/30, ¤U¤È 01:43 Main Unit Controls (Rear) 13. AC power cord socket 5 20070425_HDT-1&HDT-1X_381R20S-A. p658 2007/4/30, ¤U¤È 01:43 Accessories Detachable power Cord x 1 FM Dipole Antenna x 1 AM Loop antenna x 1 6 20070425_HDT-1&HDT-1X_381R20S-A. p659 2007/4/30, ¤U¤È 01:44 RCA type audio cable x 1 Remote control unit x 1 Instruction manual x 1 Warranty cardSeek Function To seek to another clear station, use the SEEK toggle button . [. . . ] Connect the opposite end into an AC outlet located near the unit. 8 20070425_HDT-1&HDT-1X_381R20S-A. p6511 2007/4/30, ¤U¤È 01:44 Navigating the Display There are many display functions. This will help you understand what the display is telling you, making navigation and setup easier. (A)Radiotext, (B)Time, (C)Signal quality, (D)Frequency, (E)and Audio spectrum. : HD RADIO Indicator : Siqnal Indicator : Station Name-MulticastSetIndex : Artist : Title : Program Type : Sterei Indicator(For HDT-1X only) : RDS Indicator : Program Station : Program Type : Callsign : Radio Text 9 20070425_HDT-1&HDT-1X_381R20S-A. p6512 2007/4/30, ¤U¤È 01:44 Setting up and Programming your HDT-1/HDT-1X Setting the clock Clock setting can be done when the tuner is in Standby (power off) 1. 2 seconds until display flashes "clock set "to enter Clock Set mode. Display will appear ERROR if the input is incorrect. 10 20070425_HDT-1&HDT-1X_381R20S-A. p6513 2007/4/30, ¤U¤È 01:44 Radio Controls To turn the radio on, press the Standby button. In standby, the tuner will display the time, dim the backlight and standby LED will be on. Selecting the radio band Press the BAND button to select the appropriate band . At each press of the BAND button, the band switches from AM1 AM2 FM1 FM2. When you switch from one band to another, the radio will return to the last tuned station used in the band. 11 20070425_HDT-1&HDT-1X_381R20S-A. p6514 2007/4/30, ¤U¤È 01:44 Manual Tuning Press the TUNING rocker switch UP or DOWN to tune up or down to select a radio station. Tuning step per press for AM band is 10 kHz and 100 kHz for FM band. Direct Tuning By using numbered key pad, you can directly tune to a radio station. For example, to tune to station 93. 30 FM, press BAND button to select FM band followed by pressing FREQ button and numbered buttons 9-3-3. To tune to 1120 AM, press BAND button to select AM band, followed by pressing FREQ button and buttons 1-1-2-0. Display will appear ERROR if the input frequency is incorrect or out of coverage. 12 20070425_HDT-1&HDT-1X_381R20S-A. p6515 2007/4/30, ¤U¤È 01:44 Receiving HD radio stations When the radio is tuned to a station broadcasting HD radio signal, the LCD will display a blinking "HD "logo. Once the tuner acquires the HD radio signal, the "HD" logo will stay on and a Signal Strength indication will appear in the top right hand corner. Receiving Multicast Stations When the radio is tuned to an HD radio compatible station and it determines that one or more Multicast stations are available, the Frequency or the Call Letters will be followed by a "-1" designator, indicating that there is at least one Multicast station available. The TUNE UP button will tune up from a station's Main Program Service Station to the Multicasting programs. 13 20070425_HDT-1&HDT-1X_381R20S-A. p6516 2007/4/30, ¤U¤È 01:44 Seek Function To seek to another clear station, use the SEEK toggle button. Press and release the SEEK UP or DOWN will go to the next available station with good signal. Press any key to stop SEEK function. HD SEEK function Using the HD SEEK button, the tuner will seek to the next available HD station. Press and release HD SEEK UP or DOWN will go to the next available HD station with good signal. [. . . ] LCD Contrast ­ pressing TUNING UP or DOWN button to adjust LCD contrast. Back Light Setting ­ pressing TUNING UP or DOWN button to adjust Back Light. Stereo/Mono Mode ­ pressing TUNING UP or DOWN button to adjust Stereo/mono. [. . . ]